GE 23, 25, 26 installation instructions Safety Precautions, Safety Instructions

Page 2

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Operating Instructions

Installation

Instructions

Consumer Support Troubleshooting Tips

This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used.

Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

Do not touch the cold surfaces in the freezer compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

In refrigerators with automatic icemakers,

avoid contact with the moving parts of the ejector mechanism, or with the heating element located on the bottom of the icemaker. Do not place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

Unplug the refrigerator before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

Non-LCD models: Setting either or both controls to 0 (off) does not remove power to the light circuit.

LCD models: Turning the cooling system off does not remove power to the light circuit.

Do not refreeze frozen foods which have thawed completely.

Always clean the CustomCoolTray after thawing food.

2

Image 2
Contents Ge.com Write the model and serial numbers here Model # Serial #Safety Precautions Safety InstructionsRefrigerator or Freezer RefrigerantsBefore You Throw Away Your Old Ge.comHOW to Connect Electricity Operating InstructionsInstructions About the temperature controlsInstructions Installation SupportInstallation Instructions Tips About Set FeaturesSafety Instructions About TurboCoolHow to Use How to Remove and Replace the DrawerAbout CustomCool.on some models CustomCool ChartHow to Use the Beverage Center LCD models only Consumer SupportAbout QuickFreeze.on some models About the water filterSlide-Out Spillproof Shelf About the shelves and binsRefrigerator Door Bins and Freezer Door Tilt-Out Bins QuickSpace ShelfSlide-Out Freezer Shelves Tips Consumer SupportFreezer Baskets Fixed Freezer ShelvesAbout the refrigerator doors Operating Instructions Safety InstructionsInstallation Instructions Refrigerator DoorsAbout crisper removal Safety Instructions Operating InstructionsAbout the crispers and pans Automatic Icemaker Operating Instructions SafetyAbout the automatic icemaker Special note about dispenser modelsAbout the ice and water dispenser. on some models Cleaning the Outside Care and cleaning of the refrigeratorInstallation Instructions Troubleshooting Tips Cleaning the InsidePreparing for Vacation SafetyBehind the Refrigerator Preparing to MoveReplacing the light bulbs Operating Instructions″ 19 mm or Raised Panel Trim kits and decorator panelsPanels less than 1/4 ″ 6 mm thick 25‘ CustomStyle Dimensions for Custom Wood Panels Installation Instructions23‘ Dimensions for Custom Wood Panels Freezer Panel Without DispenserInsert the Bottom Freezer Panel on dispenser models Inserting the door panelsInsert the Freezer Panel and Fresh Food Panel Attach the Top Trim on the Freezer and Fresh Food DoorsInstall the Side Trim These pieces are tucked inside the refrigerator door handleBefore YOU Begin Preparation Water Supply to the IcemakerMoving the Refrigerator Remove the Base GrilleDisconnect the Power Coupling on some models Remove the Freezer DoorRemove the Freezer Door Remove the Refrigerator DoorReplacing the Doors Lift the refrigerator door up and off the bottom hingeClearances Dimensions and SpecificationsRefrigerator Location Turn on the Water Supply Plug in the RefrigeratorLevel the Doors PUT the Refrigerator in PlaceLevel the Refrigerator Start the Icemaker Replace the Base GrilleSET the Controls What YOU will Need Drill the Hole for the Valve Shut OFF the Main Water SupplyChoose the Valve Location Route the Tubing Fasten the Shutoff ValveTighten the Pipe Clamp Connect the Tubing to the ValveNormal operating sounds Safety Instructions Operating Instructions InstallationTroubleshooting Tips Consumer Support Refrigerator does not operate Before you call for service…Consumer Support Troubleshooting Tips Slight vibration is normalSetting. This is normal Is warm Is first installed Water dispenser has not beenLast setting was Crushed ConnectedOperating Instructions Safety Instructions Installation Evaporator, condenser What is covered How Long Warranted Parts LabourCompressor Tubing and refrigerantWhat GE Will Not Cover Operating Instructions Safety InstructionsGE Will Replace General Installation/Operation/Maintenance Requirements Performance Data SheetOperating Specifications Special NoticesName Address City State Zip Signature Date We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Safety Instructions Operating Instructions
Related manuals
Manual 112 pages 21.67 Kb Manual 88 pages 38.63 Kb Manual 100 pages 44.66 Kb

23, 26, 25 specifications

The GE 25, officially known as the General Electric 25 (GE 25), is a revolutionary advanced gas turbine designed to enhance the efficiency and productivity of power generation. This cutting-edge turbine is engineered with an eye towards meeting the evolving demands of the energy market while ensuring environmental sustainability.

One of the primary features of the GE 25 is its highly efficient combustion process. Utilizing advanced combustion technology, the turbine achieves lower emissions of nitrogen oxides (NOx) while maintaining a high power output. The GE 25 is designed for use in both simple cycle and combined cycle power plants, making it a versatile choice for various energy generation applications. The turbine's ability to transition seamlessly between these cycles allows operators to optimize energy production based on demand.

The GE 25 is built with advanced materials that enhance durability and performance. The components are constructed from high-temperature alloys that withstand extreme operating conditions, thus ensuring longevity and lower maintenance costs. This durability is crucial as it minimizes downtime and maximizes productivity in power generation facilities.

Innovative technologies incorporated into the GE 25 include advanced aerodynamics and an intelligent control system. The turbine features an optimized blade design that improves airflow efficiency and reduces drag, resulting in higher overall performance. Additionally, the intelligent control system offers real-time monitoring and analysis, enabling predictive maintenance and ensuring that the turbine operates at peak efficiency.

The turbine's modular design simplifies installation and maintenance processes. This allows for faster commissioning times and enhances operational flexibility, making it a preferred choice for both new installations and retrofitting older plants. The GE 25 is also compatible with a wide range of fuel types, including natural gas, biogas, and even hydrogen blends, which aligns with the industry's shift towards more sustainable energy sources.

In summary, the GE 25 stands out as a powerhouse in the gas turbine industry, with its cutting-edge features, advanced technologies, and robust characteristics. By prioritizing efficiency, durability, and flexibility, the GE 25 meets the current and future energy needs while contributing to a greener planet. As the demand for reliable and sustainable energy sources continues to grow, the GE 25 will play a vital role in shaping the future of power generation.