GE 26, 25, 23 installation instructions HOW to Connect Electricity, Operating Instructions

Page 4

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

Operating Instructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

If the outlet is a standard 2-prong outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

Installation

Instructions

Consumer Support Troubleshooting Tips

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Ge.com Write the model and serial numbers here Model # Serial #Safety Precautions Safety InstructionsRefrigerants Before You Throw Away Your OldRefrigerator or Freezer Ge.comHOW to Connect Electricity Operating InstructionsAbout the temperature controls Instructions InstallationInstructions SupportAbout Set Features Safety InstructionsInstallation Instructions Tips About TurboCoolHow to Use How to Remove and Replace the DrawerCustomCool Chart How to Use the Beverage Center LCD models onlyAbout CustomCool.on some models Consumer SupportAbout QuickFreeze.on some models About the water filterAbout the shelves and bins Refrigerator Door Bins and Freezer Door Tilt-Out BinsSlide-Out Spillproof Shelf QuickSpace ShelfTips Consumer Support Freezer BasketsSlide-Out Freezer Shelves Fixed Freezer ShelvesOperating Instructions Safety Instructions Installation InstructionsAbout the refrigerator doors Refrigerator DoorsAbout the crispers and pans Safety Instructions Operating InstructionsAbout crisper removal Operating Instructions Safety About the automatic icemakerAutomatic Icemaker Special note about dispenser modelsAbout the ice and water dispenser. on some models Care and cleaning of the refrigerator Installation Instructions Troubleshooting TipsCleaning the Outside Cleaning the InsideSafety Behind the RefrigeratorPreparing for Vacation Preparing to MoveReplacing the light bulbs Operating InstructionsPanels less than 1/4 ″ 6 mm thick Trim kits and decorator panels″ 19 mm or Raised Panel Installation Instructions 23‘ Dimensions for Custom Wood Panels25‘ CustomStyle Dimensions for Custom Wood Panels Freezer Panel Without DispenserInserting the door panels Insert the Freezer Panel and Fresh Food PanelInsert the Bottom Freezer Panel on dispenser models Attach the Top Trim on the Freezer and Fresh Food DoorsInstall the Side Trim These pieces are tucked inside the refrigerator door handleBefore YOU Begin Preparation Water Supply to the IcemakerMoving the Refrigerator Remove the Base GrilleDisconnect the Power Coupling on some models Remove the Freezer DoorRemove the Freezer Door Remove the Refrigerator DoorReplacing the Doors Lift the refrigerator door up and off the bottom hingeRefrigerator Location Dimensions and SpecificationsClearances Turn on the Water Supply Plug in the RefrigeratorLevel the Refrigerator PUT the Refrigerator in PlaceLevel the Doors SET the Controls Replace the Base GrilleStart the Icemaker What YOU will Need Choose the Valve Location Shut OFF the Main Water SupplyDrill the Hole for the Valve Fasten the Shutoff Valve Tighten the Pipe ClampRoute the Tubing Connect the Tubing to the ValveTroubleshooting Tips Consumer Support Safety Instructions Operating Instructions InstallationNormal operating sounds Before you call for service… Consumer Support Troubleshooting TipsRefrigerator does not operate Slight vibration is normalIs warm Is first installed Water dispenser has not been Last setting was CrushedSetting. This is normal ConnectedOperating Instructions Safety Instructions Installation What is covered How Long Warranted Parts Labour CompressorEvaporator, condenser Tubing and refrigerantGE Will Replace Operating Instructions Safety InstructionsWhat GE Will Not Cover Performance Data Sheet Operating SpecificationsGeneral Installation/Operation/Maintenance Requirements Special NoticesName Address City State Zip Signature Date We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Safety Instructions Operating Instructions
Related manuals
Manual 112 pages 21.67 Kb Manual 88 pages 38.63 Kb Manual 100 pages 44.66 Kb

23, 26, 25 specifications

The GE 25, officially known as the General Electric 25 (GE 25), is a revolutionary advanced gas turbine designed to enhance the efficiency and productivity of power generation. This cutting-edge turbine is engineered with an eye towards meeting the evolving demands of the energy market while ensuring environmental sustainability.

One of the primary features of the GE 25 is its highly efficient combustion process. Utilizing advanced combustion technology, the turbine achieves lower emissions of nitrogen oxides (NOx) while maintaining a high power output. The GE 25 is designed for use in both simple cycle and combined cycle power plants, making it a versatile choice for various energy generation applications. The turbine's ability to transition seamlessly between these cycles allows operators to optimize energy production based on demand.

The GE 25 is built with advanced materials that enhance durability and performance. The components are constructed from high-temperature alloys that withstand extreme operating conditions, thus ensuring longevity and lower maintenance costs. This durability is crucial as it minimizes downtime and maximizes productivity in power generation facilities.

Innovative technologies incorporated into the GE 25 include advanced aerodynamics and an intelligent control system. The turbine features an optimized blade design that improves airflow efficiency and reduces drag, resulting in higher overall performance. Additionally, the intelligent control system offers real-time monitoring and analysis, enabling predictive maintenance and ensuring that the turbine operates at peak efficiency.

The turbine's modular design simplifies installation and maintenance processes. This allows for faster commissioning times and enhances operational flexibility, making it a preferred choice for both new installations and retrofitting older plants. The GE 25 is also compatible with a wide range of fuel types, including natural gas, biogas, and even hydrogen blends, which aligns with the industry's shift towards more sustainable energy sources.

In summary, the GE 25 stands out as a powerhouse in the gas turbine industry, with its cutting-edge features, advanced technologies, and robust characteristics. By prioritizing efficiency, durability, and flexibility, the GE 25 meets the current and future energy needs while contributing to a greener planet. As the demand for reliable and sustainable energy sources continues to grow, the GE 25 will play a vital role in shaping the future of power generation.
Top Page Image Contents