Instructions
About the shelves and bins.
Not all features are on all models.
Instructions Safety
Snugger
Refrigerator bin
Refrigerator Door Bins
The refrigerator door bins are adjustable.
To remove: Lift the front of the bin straight up, then lift up and out.
To replace or relocate: Engage the back side of the bin in the molded supports of the door. Then push down on the front of the bin. Bin will lock in place.
The snugger helps prevent tipping, spilling or sliding of small items stored on the door shelf. Place a finger on either side of the snugger near the rear and move it back and forth to fit your needs.
Instructions Operating
Deep Door Shelves
Detachable shelf extenders deepen and enclose fixed door shelves, providing more storage room and greater storage flexibility.
To remove: Lift the shelf extender straight up then pull out.
To replace: Engage the shelf extender in the molded supports on the door and push in. It will lock in place.
Consumer Support Troubleshooting Tips Installation
Press tab and pull shelf forward to remove
Slide-Out Spillproof Shelf
The
To remove:
Slide the shelf out until it reaches the stop, then press down on the tab and slide the shelf straight out.
To replace or relocate:
Line the shelf up with the supports and slide it into place. The shelf can be repositioned when the door is at 90° or more. To reposition the shelf, slide the shelf past the stops and angle downward. Slide shelf down to the desired position, line up with the supports and slide into place.
Make sure you push the shelves all the way back in before you close the door.
8