GE 162D9639P009 owner manual Preparing to install the refrigerator, Door Reversal on some models

Page 10

Instructions

Preparing to install the refrigerator.

Troubleshooting Tips Installation Instructions Operating Instructions Safety

Plug buttons

Hinge cover

 

or screws

Hinge

Plug button

 

 

Bottom

Spacer

hinge

Leveling legs

Door Reversal (on some models)

1.Remove the small plug button on the left side of the door top cap.

2.Remove the three plug buttons or screws on the left side on top of the cabinet.

3.Remove the plastic hinge cover by lifting it up by the front edge.

4.Remove the three screws from the top hinge.

5.Lift the door up and off the bottom hinge (right side).

6.Tilt the refrigerator cabinet back to remove the right leveling leg.

7.Remove the screws on the bottom hinge (right side) and the left leveling leg. Move the bottom hinge to the left side and secure it with the screws and leveling leg.

IMPORTANT: The left leg has a spacer that must be moved to the right side leveling leg when the door swing is reversed.

8.Screw the right leveling leg, with the spacer in place, back in place on the right side.

9.Position the door on the left bottom hinge. With the magnetic gasket holding the door in place, secure the top hinge with screws.

10.Make sure the door is aligned with the refrigerator cabinet before continuing.

Consumer Support

11.Replace the hinge cover on top of the hinge.

12.Put the plug button in the hole on the right side of the door cap.

13.Put the three plug buttons or screws on the right side on top of the cabinet.

10

Image 10
Contents Installation Instructions Write the model and serial numbers here Model # Serial #Tips Installation Instructions Operating RefrigerantsSupport Safety Instructions Operating InstructionsInstallation Instructions Troubleshooting Tips Consumer Ge.comControl Settings How To Test TemperaturesIce Tray Compartment About the refrigerator featuresShelves Door ShelvesCleaning the Inside Cleaning the OutsideReplacing the Light Bulb on some models To defrost Defrosting on push button defrost models onlyAfter defrosting Preparing to Move Care and cleaning of the refrigeratorPreparing for Vacation Defrosting on manual defrost models onlyLeveling Legs on some models Preparing to install RefrigeratorRead these instructions completely and carefully Consumer SupportPreparing to install the refrigerator Door Reversal on some modelsSafety Cubic Foot ModelsBefore you call for service… Problem Possible Causes What To DoMoisture forms on Refrigerator too warmRefrigerator has odor Outside of refrigeratorTroubleshooting Tips What GE Will Not Cover GE Will ReplaceOperating Instructions Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio

162D9639P009 specifications

The GE 162D9639P009 is an advanced component widely recognized for its application in various industrial and commercial systems. This part, often associated with General Electric (GE), represents cutting-edge technology designed for enhancement in performance, reliability, and efficiency.

One of the standout features of the GE 162D9639P009 is its robust construction, allowing it to endure rigorous operational environments. This durability is critical in industrial applications, where components face continuous use, varying temperatures, and potentially harmful conditions. The materials used in the construction of this part are selected for high strength and resistance to wear, ensuring long lifespan and reducing the need for frequent replacements.

In terms of technological capabilities, the GE 162D9639P009 integrates advanced electronic functionality, which enhances its operational efficiencies. With innovative circuitry designed to minimize power consumption, this component supports sustainability initiatives by providing energy-efficient solutions. The electronics not only improve the performance metrics of the systems in which they are integrated but also help in managing operational costs over time.

Another notable characteristic of the GE 162D9639P009 is its compatibility with a wide range of systems, making it a versatile choice for various applications. This adaptability opens doors to many industrial sectors, from manufacturing and construction to energy production and transportation. The ease of installation and integration of this component allows for quick deployments and upgrades in existing systems, minimizing downtime and promoting continuity of operations.

Furthermore, the GE 162D9639P009 is designed with user-friendly features that simplify maintenance and monitoring. Built-in diagnostics and indicators enable operators to quickly assess functionality and performance, ensuring timely interventions when necessary. This proactive maintenance capability enhances overall system performance and reliability, which is essential in high-stakes environments.

In conclusion, the GE 162D9639P009 stands as a testament to General Electric's commitment to innovation and excellence in engineering. With its robust design, advanced technology, wide compatibility, and user-centric features, this component is instrumental in driving efficiency and reliability across various applications, solidifying its role as a critical part of modern industrial solutions.