GE 162D9639P009 owner manual Safety, Cubic Foot Models

Page 11

ge.com

Safety

Top cover

Left hinge location

Plug button

Spacer

Upper hinge

Top plate

Door top cap

Bottom hinge

Leveling legs

Door Reversal (on some models)

4 Cubic Foot Models

1.Remove the two screws at the back of the top cover.

2.Remove the top cover by lifting the back up about 2″ and then sliding it forward.

3.Remove the small plug button on the left side of the door top cap.

4.Remove the three screws on the upper hinge (right side). Remove the hinge.

5.Remove the three screws at the left hinge location on the top plate.

6.Remove the screw in the middle of the top plate and remove the top plate.

7.Lift the door up and off the bottom hinge (right side).

8.Tilt the refrigerator cabinet back to remove the right leveling leg.

9.Remove the screws on the bottom hinge (right side) and the left leveling leg. Move the bottom hinge to the left side and secure it with the screws and leveling leg.

IMPORTANT: The left leg has a spacer that must be moved to the right side leveling leg when the door swing is reversed.

10.Screw the right leveling leg, with the spacer in place, back in place on the right side.

11.Position the door on the left bottom hinge. With the magnetic gasket holding the door in place, secure the top hinge with screws.

12.Make sure the door is aligned with the refrigerator cabinet before continuing.

Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer

13.Replace the top plate and screws.

14.Slide the top cover back in place and replace the two screws.

15.Put the plug button in the hole on the right side of the door top cap.

Support

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Write the model and serial numbers here Model # Serial # Installation InstructionsRefrigerants Tips Installation Instructions OperatingGe.com Safety Instructions Operating InstructionsInstallation Instructions Troubleshooting Tips Consumer SupportHow To Test Temperatures Control SettingsDoor Shelves About the refrigerator featuresShelves Ice Tray CompartmentReplacing the Light Bulb on some models Cleaning the OutsideCleaning the Inside After defrosting Defrosting on push button defrost models onlyTo defrost Defrosting on manual defrost models only Care and cleaning of the refrigeratorPreparing for Vacation Preparing to MoveConsumer Support Preparing to install RefrigeratorRead these instructions completely and carefully Leveling Legs on some modelsDoor Reversal on some models Preparing to install the refrigeratorCubic Foot Models SafetyProblem Possible Causes What To Do Before you call for service…Outside of refrigerator Refrigerator too warmRefrigerator has odor Moisture forms onTroubleshooting Tips Operating Instructions GE Will ReplaceWhat GE Will Not Cover Real Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website

162D9639P009 specifications

The GE 162D9639P009 is an advanced component widely recognized for its application in various industrial and commercial systems. This part, often associated with General Electric (GE), represents cutting-edge technology designed for enhancement in performance, reliability, and efficiency.

One of the standout features of the GE 162D9639P009 is its robust construction, allowing it to endure rigorous operational environments. This durability is critical in industrial applications, where components face continuous use, varying temperatures, and potentially harmful conditions. The materials used in the construction of this part are selected for high strength and resistance to wear, ensuring long lifespan and reducing the need for frequent replacements.

In terms of technological capabilities, the GE 162D9639P009 integrates advanced electronic functionality, which enhances its operational efficiencies. With innovative circuitry designed to minimize power consumption, this component supports sustainability initiatives by providing energy-efficient solutions. The electronics not only improve the performance metrics of the systems in which they are integrated but also help in managing operational costs over time.

Another notable characteristic of the GE 162D9639P009 is its compatibility with a wide range of systems, making it a versatile choice for various applications. This adaptability opens doors to many industrial sectors, from manufacturing and construction to energy production and transportation. The ease of installation and integration of this component allows for quick deployments and upgrades in existing systems, minimizing downtime and promoting continuity of operations.

Furthermore, the GE 162D9639P009 is designed with user-friendly features that simplify maintenance and monitoring. Built-in diagnostics and indicators enable operators to quickly assess functionality and performance, ensuring timely interventions when necessary. This proactive maintenance capability enhances overall system performance and reliability, which is essential in high-stakes environments.

In conclusion, the GE 162D9639P009 stands as a testament to General Electric's commitment to innovation and excellence in engineering. With its robust design, advanced technology, wide compatibility, and user-centric features, this component is instrumental in driving efficiency and reliability across various applications, solidifying its role as a critical part of modern industrial solutions.
Top Page Image Contents