Samsung RF4287HARS user manual Disassemble the refrigerator doors

Disassemble the refrigerator doors

Be careful not to drop and scratch the doors while warning removing the doors.

Disassemble the refrigerator doors

1.With the door opened, remove the cap top table ( 1 ) with a flat-blade screwdriver(-), and close the door. Remove the

3 screws holding down the top table ( 2 ) and turn it with several wires connected.

2.Disconnect one connector ( 3 ) on the

right side door and one connector ( 4 )	4
on the left side door. Remove the water	Red Clip
line ( 5 ) while pressing the dark gray	(1/4")
color part ( 6 ) of the water line coupler.
If a red clip is on the coupler, it must
caution be removed before removing the tube.	5
	6

2

1

3

3.Remove the 3 hex head bolts ( 7 ) attached to the upper left

and right door hinges with a socket wrench (10mm). Remove the ground screw ( 8 ) attached to the upper left and right door hinges with a philips screwdriver(+). Remove the upper left and 7 right door hinges ( 9 ).

9

Socket wrench

8

4.Lift the door straight up to remove.

5.Remove the screw ( 10 ) attached to the lower left and right door hinges with a philips screwdriver(+). Remove the 2 hex head bolts ( 11 ) attached to the lower left and right door hinges with an allen wrench (3/16”). Remove the lower left and right door hinges ( 12 ).

12

10

11

Allen wrench

10_ setting up