Assemble the freezer drawer
1. Pull out the rails fully on each side of the cabinet.
2. Attach the freezer door front onto the open slots on the sides. | slot |
3.Tighten 4 hex head bolts completely with a socket wrench
(10mm).
4. Insert the lower basket ( 3 ) into the rail system.
3
5.Hook the ends of the tilting pocket ( 1 ) onto the support guards ( 2 )
and push down until they lock into place.
1
2
6. Insert the upper drawer.
Remove 2 pieces of tape ( 4 ) attached to the side of the drawer bin.
Reattach the tape in the same position when moving the4 refrigerator to prevent scratching the drawer bin.
16_ setting up