ADJUSTING THE HEIGHT BETWEEN THE DOORS
If the Arctic Select Zone Door is lower than the Fresh Select Zone Door.
adjustment part
Arctic Select Zone
Fresh Select Zone
1)Locate the
➁
➀
2) Unscrew the
➂
3) Find the best
CASE) The gap is about 2mm (0.08inch) as shown below.
gap
Arctic Select Zone Door | Fresh Select Zone Door |
reference plane
-Rotate down the
-The number of the adjuster to rotate depends on the gap.
After adjustment, tighten the screws (➁ & ➂ ) in reverse order.
The adjuster in the Fresh Select Zone can be used in the same way.
NOTE
INSTALLATION INSTRUCTIONS
23