SETTING UP THE REFRIGERATOR
Once you have performed the following steps, your refrigerator should be fully operational. If not, check the power supply and electricity source. If you have any questions, contact your SAMSUNG Electronics service center.
Place the refrigerator in an appropriate location with reasonable clearance between the wall and the refrigerator. (refer to instal- lation instructions in this mannal)
When the refrigerator is plugged in, the interior light should come on when you open the doors.
Set the temperature control to the coldest temperature and wait for an hour. The freezer should get slightly chilled and the motor should run smoothly.
Once the refrigerator temperature is suffi- ciently low, you can store food in it.
After starting the refrigerator, it takes a few hours to reach the appropriate tempera- ture.
-You can arrange the Power cable with this Cable tie, after you plug in the refrigerator.
-If the refrigerator is not to be used for a long period of time, you can also arrange the power cable with this cable clamp located in the top of the refrigerator as shown.
Cable clamp
Cable tie
MAJOR FEATURES
TDM System (Time-Divided-Multi-Evaporator system)
• Each compartment has an evaporator, microprocessors and a refriger-
• Cool air circulates through multiple vents on every shelf level. This pro- vides even distribution of cooling inside cabinets to keep your food fresh longer.
Door Alarm
• Beeper reminds you that the door is open.
Xtra FreshTM
• Optimized humidity control keeps vegetables & fruits fresh.
Arctic Select ZoneTM Drawer
• Arctic Select Zone Drawer can be changed from a freezer to refrigerator with the TDM system.You can select Power Freeze, Freeze, Soft Freeze, or Cool depending on the food stored.
Fresh Select ZoneTM Drawer
• You can select Soft Freeze, Chill, Cool or Fresh depending on the food stored.
With the Cool and Fresh settings, the humidity is controlled by TDM system.
4