6.LOAD STATUS DISPLAY
1)Press power freezing / regular conditing and power refrigerating / power saving key for five seconds then press temperature control key in the refrigerator after temperature display lamps on and off three times
2)This mode shows which lamps is being sourced signal from MICOM currently. This doesn’t mean the load is operate due to the open wire or relay missing though the display shows the compressor operating.
3)Load status display return to normal mode after sixty seconds.
4)Follows are load status and related dispay.
NO | ITEM |
| DISPLAY LED | DISPLAY |
|
|
|
|
|
|
|
| FREEZER SUBORDINATE |
|
|
| |
|
|
|
|
|
|
1 | COMP |
| FREEZER ”LOW” | RELEVANT LED ON DURING COMPRESSOR OPERATION |
|
|
|
|
|
|
|
2 |
| FREEZER ”LOW,MID” | RELEVANT LED ON DURING |
| |
|
|
|
|
|
|
3 | FREEZER DEFROST HEATER |
| FREEZER ”MID” | RELEVANT LED ON DURING FREEZER DEFROST HEATER ON. |
|
|
|
|
|
|
|
| REFRIGERATOR SUBORDINATE |
|
|
| |
|
|
|
|
|
|
4 |
| REFRIGERATOR ”LOW” | RELEVANT LED ON DURING |
| |
|
|
|
|
|
|
5 | REFRIGERATOR DEFROST HEATER |
| REFRIGERATOR ”MID” | RELEVANT LED ON DURING REFRIGERATOR DEFROST |
|
|
|
|
|
|
|
| MODE DISPLAY |
|
|
| |
|
|
|
|
|
|
6 | INITIAL MODE |
| POWER FREEZER | RELEVANT LED ON QITH INITIAL POWER INPUT. |
|
|
|
|
|
|
|
7 | OVERLOAD |
| POWER REFRGERATOR | RELEVANT LED ON QHEN |
|
|
|
|
|
|
|
8 | LOW TEMP MODE |
| POWER SAVING | RELEVANT LED ON QHEN |
|
|
|
|
|
|
|
|
|
| (LOAD STATUS DISPIAY TABLE) |
-16-