Samsung SR-65NMC, SR-65KTC, SR-69NMC, SR-61KTC, SR-61NMC B. In case of R-FANdo not run ①Check, －50－

Page 51

B. In case of R-FAN do not run.

①Check

START

Select Forced operation

Forced operation

FAN is operating condition to ROTRAY

S/W or SENSOR?

Reference checked ROTARY S/W and changed set up.

Does it uun after the door S/W pressed?

F-FAN O.K

Does the door S/W works nomally?

Change DOOR S/W

Is MAIN PCB con70 connection O.K?

Re-connection CON70

Output the MICOM pin#18 stghal?

Change lead and MICOM chang PCB

Is 5V IC3(KA2657) #15 signal?

IC3(KA2657) Failure

Chesk ssr (ssr72) change

MAIN PCB ASSY

－50－

Image 51

Contents REFRIGERATOR CONTENTSModel SR-61KTC/SR-61NMC SR-65KTC/SR-65NMC SR-69NMC1. Product specifications Prohibition Description of symbols2.Safety precautions and warnings Warning/CautionReted ProhibitionProhibition ProhibitionREFRIGERATION PARTS 3. ELECTRIC PARTS STANDARDTEMPERATURE DEFROST ELECTRIC PARTS 4. Electric diagram 4-1.Electronic modeSR-61KTC,65KTCT4-2SEMI BASIC SR-61NMC,65NMC, 69NMC 5. Cool Air Circulation SR-69NMC 6. FUNCTIONS AND DIRECTIONSMODEL SR-61NMCDID CASE 6-2.THE NAME OF EACH PARTS AND DISASSEMBLE METHODDOOR GUARD CHILLED ROOM SHELF－11－ 6-3.CYCLE OF FREEZING7. TEMPERATURE CONTROL AND THE OTHERS 3.Alarming 3Forced operating and defrosting“ Beep”sound 5.SELF DIAGNOSIS 6.LOAD STATUS DISPLAY 7.operating of fan motor －18－ ※Personal Informatin7-2,SEMI ELECTRONIC MODE D. TEST FUNCTION Page 8. CIRCUIT OPERATING THEORY 4.DOOR S/W SENSING PART 5. TEMP·SENSING PART REMARK 7. COMP AND DEFROSTING HEATER OPERATINGSTATES LOAD8. BLDC MOTOR Operation Circuit 1-2FAN MOTOR IN THE FREEZER R-FAN REMARK 9. POTION PART 1PRINCIPIE OF MAVEMENTNAME STANDARD8-2.SEMI ELECTROMAGNETIC 9-1.POWER PART 9-3.RESET CIRCUIT PART 9-5.TEMP. CONTROL CIRCUIT.ROTARY S/W －31－ B. REFRIGERATOR TEMP ※ CAUTIONIt is appeared the S/W cross spot of ROTARY S/Wcircuit ①~⑩－32－ 6. ELECRICAL LOAD SIGNAL LAMP CONTROL PARTB. MOVEMENT PRINCIPAL －34－ ※PERSANAL INFORMARemark MODEL NAME1.ELECTRICAL SR-61KTC,65KTC 9.Diagnosis of disorder and method of repair1.Check the power of consent and power code 1.No input Power－37－ 2.Self diagnosis failureOuter temper ature sensor failure ②Refrigerator temp, sensor failure－38－ Freezer tem sensor failare－39－ Freezer’s defrosting sensor failure3. In case of contiunous alarming REFRENCES ②In case of“Beep-Beep”alarming 4. In case of FAN do not run REFRENCES －43－ ①In case of F-FANdoesn’t run Run the DC voltage－44－－45－ Forced operation Check CON70 connection checkthe MOTOR Check the MOTOR Chang the MOTOR －46－ 9. Diagnosis of disorder and method of repair1.When not operating Power 2.SENMI electronic mode SR-61NMC,65NMC－47－ 2. Self diagnosis failureA. Freezer’s temp·sensor failure B. Refrigerator’s temp, senser failureC. Freezer’s defrosting sensor failure D. Refrigerator’s defrosting sensor failure－48－ 3.In case of FAN in the refrigerator doern’t run －50－ B. In case of R-FANdo not run ①Check②Check ROTARY S/W －51－Is proper the retrigerators temp·regulator? 4.Badress management of freeze cycle Appearance －53－ 10-1.Freezer comoartmentSR-61KTC,65KTC10-2.Freezer compartment SR61NMC,65NMC,69NMC －55－ 10-3.Refrigerator Compartment SR-61KTC,65KTCTHERMO-FUSE,ASSY SENSOR-ASSY EVAP-REF CHASSIC-COMPASSY CHASSIC-COMPASSY HING-MID-ASSYHANDLE-REF,ASSY 10-7.Related Components of DOORHANDLE-FRE,ASSY CASE-DLSPLAY,ASSY1.Disassemble lathch the top cover of refrigerator 1Remove the back cover lamp and then in door lamp 11-2.Replacement of freezer in door lamp11-3.Replacement of refrigerator in door lamp SR-61KTC SR-61/65/69NMC11-4.Disassemble of refrigerator cooling part 1 Push the cold storage and remove it2Remove foods and shelves inside the Refrigerator Remove 2 screws la tchNoise protector Groove for preventing small ice when defrosting2 holders securing evaporator CABLE TIE FOAM-LEX Temp·fuse Temp·sensor1 Pull out the shelf 2 Disassemble DID door with up the iower HINGE Assembly specifcation of Freezer cooler part11-6.Disjonting of DID door 1 Disassembie inner lower GROMMET of DID doorCondenser entrance Rubber for Noise protector 11-7.Unit assemblyMotor fan Hot pipe entrance S-PIPE Pace condenser Pace condenser entranceCondenser 11-8.Electric box assembly1.Disconnect the power cord 3.Assembly specification of electric box TEST S/WFUSE Condenser TRANS-POWER 11-9.Electric box assembly1.Disconnect the power cord 3.Assembly specification of electric box TEST S/WEXAMPLE OF PERFECT PACKING 12. PACKINGPACKING OF DOOR AND CABINET PACKING EXAMPLE OF FRONT SIDE AND BACK SIDECircuit way ORDERING INFORMATION FEATURESBLOCK DIAGRAM 13. Main Components SpecifacationsABSOLUTE MAXIMUM RATINGS TA = ELECTRICAL CHARACTERISTICS KA7805/IELECTRICAL CHARACTERISTICS KA7812/I BLOCK DIAGRAM 3.3V VOLTAGE DETECTORFEATURES Checking low batteryELECTRICAL CHARACTERISTICS TA = ABSOLUTE MAXIMUM RATING TA =ABSOLUTE MAXIMUM RATINGS FEATURES2981THRU 8-CHANNELSOURCE DIRVERSFOR SAFETY OF SERVICE CAUTION ELECTRONICS 272, Oseon-Dong, Kwangsan-Gu Kwangju-City,KoreaTEL 82-62-950-6810,6811 FAX