Samsung DA99-01220J Assembly of the Fridge Door, Fit the Fridge door into the Assy Hinge MID

Page 24

REVERSING THE DOOR SWING

13.Remove the COVER LEG FRONT COVER by removing the screws.

16.Assemble the ASSY HINGE MID with a screw and two bolts.

COVER LEG

FRONT COVER

14.After tilting backward the refrigerator slightly for the convenience of the operation, disassemble the ASSY HINGE LOW as shown and put the AUTO GUIDE upside down, switch the position of the SHAFT.

When joining, tighten a screw not to Note make unpredicted noise.

AUTO GUIDE

17.Fit the Fridge door into the ASSY HINGE MID.

ASSY

HINGELOW

-ASSEMBLY OF THE FRIDGE DOOR

15.Switch the position of the CAP HOLE HINGE MID and a screw.

18.Secure the ASSY HINGE UPP with bolts as shown. Be careful not to drop the Fridge Door.

Image 24

Contents English DA99-01220J REV0.2Features Safety Instructions Indicates that a Serious injury existsPersonal injury or Material damage Exists Before you throw away your old refrigerator or freezer Do not overfill the refrigerator with food You must ground the refrigerator toKeep ventilation openings in the appliance Do not store pharmaceuticals productsInstalling the FRIDGE/FREEZER Using the Control Features Preparing the FRIDGE/FREEZERBasic Model Operation Button If you want to turn off, keep pressing for 3 secondsModel with Digital Display Fridge temp ButtonFreezer temp Button Alarm On Button Vacation ButtonSuper Freeze Button Model with LCD Display Operation Button Menu ButtonSelect Button FreezerFridge Freezer Wrapping foodTemperature of the refrigerator inside depends on Making ICEPour water into the ice cube maker Making ice quicklyUsing the Water Dispenser Optional OverviewFix the water supply device tightly into the fixing hole Two 1.5 litre bottles can be placedBeverage bottles On their sizeBeverage bottle RecommendedCool, Zero Zone, Soft Freeze function Quick CoolWash it in water Freezer drawerRubber door seals Cleaning the Water Dispenser Dispenser TrayWater Tank / Supply Device Connection pathHOW to Install Door Handles For LED lamp, please contact service engineer to replace itReplacing the Interior Light Optional Normal HandlEasy Handle Attach Cover screws with CAP Handle SCREWsReversing the Door Swing Additional PartsDisassembly of the Fridge Door Disconnect electric wires insideAfter removing screws, disassemble Disassembly of the Freezer Door Assy Hange MIDAssembly of the Fridge Door Assemble the Assy Hinge MID with a screw and two boltsFit the Fridge door into the Assy Hinge MID Assembly of the Freezer Door Switch the position of the CAP Hole Hinge UPPExchange the positions of a bolt Fit the Freezer Door into the Assy Hinge MIDReversing the Handle BAR Unfasten the Foot Front to fitAssemble the Assy Hinge LOW as shown below with a wrench Problems and Solutions Food in the refrigerator is frozenThere are unusual noises Usage Precautions Tips Power Saving TipsYou can hear a liquid babbling in the appliance There is a bad smell inside the applianceView of Your Fridge / Freezer Ambient Room Temperature Limits