Samsung DA99-01220J manual Installing the FRIDGE/FREEZER

Page 6

INSTALLING THE FRIDGE/FREEZER

Allow an adequate space and install the fridge/freezer on a firm, level floor.

•If the appliance is not level, there may be unusual noises and poor cooling.

•Wait for at least one hour before plugging the appliance in.

Clean the fridge/freezer.

• Wipe and clean the appliance inside and outside with a damp cloth.

Plug the fridge/freezer into a wall socket used exclusively by this appliance.

• This appliance must be properly grounded.

Place the food in the fridge/freezer.

• It is recommended that you wait for the appliance to cool for 2-3 hours before storing food in it.

Warning

Use of an grounded socket exclusively for the appliance:

•If you are using a socket with an earthing terminal, you do not require a separate earthing connection.

Use of a non-grounded socket:

•Connect the “earthing wire” to the copper plate and bury it at a depth of at least 25 cm in the ground.

25cm

LEVELLING

If the front of the appliance is slightly higher than the rear, the door can be closed more easily.

The appliance tilts down to the left.

Turn the left adjusting leg in the direction of the arrow with a flat head screwdriver until the appliance is level.

The appliance tilts down to the right.

Turn the right adjusting leg in the direction of the arrow with a flat head screwdriver until the appliance is level.

Allow the enough space for opening drawers.

Drawers can be easily opened with this condition.

depth with opened	1050mm
doors

600mm

at least 50mm

595mm

at least 50mm

130º

950mm

Image 6

Contents English DA99-01220J REV0.2Features Safety Instructions Indicates that a Serious injury existsPersonal injury or Material damage Exists Before you throw away your old refrigerator or freezer Keep ventilation openings in the appliance Do not overfill the refrigerator with foodYou must ground the refrigerator to Do not store pharmaceuticals productsInstalling the FRIDGE/FREEZER Basic Model Operation Button Using the Control FeaturesPreparing the FRIDGE/FREEZER If you want to turn off, keep pressing for 3 secondsModel with Digital Display Fridge temp ButtonFreezer temp Button Alarm On Button Vacation ButtonSuper Freeze Button Select Button Model with LCD Display Operation ButtonMenu Button FreezerFridge Freezer Wrapping foodPour water into the ice cube maker Temperature of the refrigerator inside depends onMaking ICE Making ice quicklyFix the water supply device tightly into the fixing hole Using the Water Dispenser OptionalOverview Two 1.5 litre bottles can be placedBeverage bottle Beverage bottlesOn their size RecommendedCool, Zero Zone, Soft Freeze function Quick CoolWash it in water Freezer drawerRubber door seals Water Tank / Supply Device Cleaning the Water DispenserDispenser Tray Connection pathReplacing the Interior Light Optional HOW to Install Door HandlesFor LED lamp, please contact service engineer to replace it Normal HandlEasy Handle Attach Cover screws with CAP Handle SCREWsReversing the Door Swing Additional PartsDisassembly of the Fridge Door Disconnect electric wires insideAfter removing screws, disassemble Disassembly of the Freezer Door Assy Hange MIDAssembly of the Fridge Door Assemble the Assy Hinge MID with a screw and two boltsFit the Fridge door into the Assy Hinge MID Exchange the positions of a bolt Assembly of the Freezer DoorSwitch the position of the CAP Hole Hinge UPP Fit the Freezer Door into the Assy Hinge MIDReversing the Handle BAR Unfasten the Foot Front to fitAssemble the Assy Hinge LOW as shown below with a wrench Problems and Solutions Food in the refrigerator is frozenThere are unusual noises You can hear a liquid babbling in the appliance Usage PrecautionsTips Power Saving Tips There is a bad smell inside the applianceView of Your Fridge / Freezer Ambient Room Temperature Limits