Samsung DA99-01220J manual Disassembly of the Freezer Door, Assy Hange MID

Page 23

REVERSING THE DOOR SWING

7.Switch the direction of the electric wire as below. Take out the COVER WIRE HINGE, L from the inside of the CAB CABI, and rejoin it with the electric wire. Make sure the length of the electric wire is more than 150mm.

COVER WIREHINGE,L

10.Switch the position of the STOPPER DOOR and the GROMMET HINGE as shown.

STOPPER DOOR

GROMMETHINGE

8.Switch the position of the SHAFT upside down on the other side of the ASSY HINGE UPP. After detaching the SHIM, reattach it on the other side of the HINGE UPP

SHAFT

SHIM

-DISASSEMBLY OF THE FREEZER DOOR

11.After unscrewing and removing two bolts, disassemble the ASSY HINGE MID.

ASSY

HANGE MID

9.After rejoining the COVER WIRE HINGE, L and the ASSY HINGE UPP and switching the position of the GROMMET HINGE and the CAP SPACE DOOR reposition the ASSY HINGE UPP and cover the COVER WIRE DOOR as shown. (The electric wire should be inside of the COVER WIRE DOOR)

12.Disassemble the Freezer Door by lifting it upward. Be careful not to drop and scratch the Freezer Door.

	GROMMET	GAP SPACE
	HINGE
		DOOR

23

Image 23

Contents DA99-01220J REV0.2 EnglishFeatures Personal injury or Material damage Exists Safety InstructionsIndicates that a Serious injury exists Before you throw away your old refrigerator or freezer Do not store pharmaceuticals products Do not overfill the refrigerator with foodYou must ground the refrigerator to Keep ventilation openings in the applianceInstalling the FRIDGE/FREEZER If you want to turn off, keep pressing for 3 seconds Using the Control FeaturesPreparing the FRIDGE/FREEZER Basic Model Operation ButtonFreezer temp Button Model with Digital DisplayFridge temp Button Super Freeze Button Alarm On ButtonVacation Button Freezer Model with LCD Display Operation ButtonMenu Button Select ButtonFridge Wrapping food FreezerMaking ice quickly Temperature of the refrigerator inside depends onMaking ICE Pour water into the ice cube makerTwo 1.5 litre bottles can be placed Using the Water Dispenser OptionalOverview Fix the water supply device tightly into the fixing holeRecommended Beverage bottlesOn their size Beverage bottleQuick Cool Cool, Zero Zone, Soft Freeze functionRubber door seals Wash it in waterFreezer drawer Connection path Cleaning the Water DispenserDispenser Tray Water Tank / Supply DeviceNormal Handl HOW to Install Door HandlesFor LED lamp, please contact service engineer to replace it Replacing the Interior Light OptionalAttach Cover screws with CAP Handle SCREWs Easy HandleAdditional Parts Reversing the Door SwingAfter removing screws, disassemble Disassembly of the Fridge DoorDisconnect electric wires inside Assy Hange MID Disassembly of the Freezer DoorFit the Fridge door into the Assy Hinge MID Assembly of the Fridge DoorAssemble the Assy Hinge MID with a screw and two bolts Fit the Freezer Door into the Assy Hinge MID Assembly of the Freezer DoorSwitch the position of the CAP Hole Hinge UPP Exchange the positions of a boltAssemble the Assy Hinge LOW as shown below with a wrench Reversing the Handle BARUnfasten the Foot Front to fit There are unusual noises Problems and SolutionsFood in the refrigerator is frozen There is a bad smell inside the appliance Usage PrecautionsTips Power Saving Tips You can hear a liquid babbling in the applianceView of Your Fridge / Freezer Ambient Room Temperature Limits