Samsung DA99-01220J manual Reversing the Door Swing, Additional Parts

Page 21

HOW TO INSTALL DOOR HANDLES

4. Attach an 'ASSY HANDLE'on the door	When attaching the other "ASSY HANDLE",
with special screws.	follow the same order as mentioned. When
	you disassemble them, just follow
	the reverse order.
SPECIAL
SCREW

5.Cover screws with "COVER SLIDER HANDLE"s.

COVER

SLIDER

HANDLE


	REVERSING THE DOOR SWING
- Read these instructions completely and carefully
	• Before reversing the door, ensure first that the refrigerator is disconnect by the plug from the
Warning	mains. You should take out contents and accessories like door guard from the doors. Be
Warning	careful not to drop the doors during dissembling or assembling.

1.Handle parts carefully to avoid scratching the paint.

2.Lay out all the screws by their related parts to avoid using them in the wrong places.

3.Provide a non-scratching work surface for the doors. (ex:blanket)

4.During door reversing, refrigerator should not be stained with oil.

- TOOLS YOU WILL NEED		- ADDITIONAL PARTS
screwdriver	7/16" inch wrench	Cover Wire Hinge, R
screwdriver	7/16" inch wrench

21

Image 21

Contents DA99-01220J REV0.2 EnglishFeatures Safety Instructions Indicates that a Serious injury existsPersonal injury or Material damage Exists Before you throw away your old refrigerator or freezer You must ground the refrigerator to Do not overfill the refrigerator with foodKeep ventilation openings in the appliance Do not store pharmaceuticals productsInstalling the FRIDGE/FREEZER Preparing the FRIDGE/FREEZER Using the Control FeaturesBasic Model Operation Button If you want to turn off, keep pressing for 3 secondsModel with Digital Display Fridge temp ButtonFreezer temp Button Alarm On Button Vacation ButtonSuper Freeze Button Menu Button Model with LCD Display Operation ButtonSelect Button FreezerFridge Wrapping food FreezerMaking ICE Temperature of the refrigerator inside depends onPour water into the ice cube maker Making ice quicklyOverview Using the Water Dispenser OptionalFix the water supply device tightly into the fixing hole Two 1.5 litre bottles can be placedOn their size Beverage bottlesBeverage bottle RecommendedQuick Cool Cool, Zero Zone, Soft Freeze functionWash it in water Freezer drawerRubber door seals Dispenser Tray Cleaning the Water DispenserWater Tank / Supply Device Connection pathFor LED lamp, please contact service engineer to replace it HOW to Install Door HandlesReplacing the Interior Light Optional Normal HandlAttach Cover screws with CAP Handle SCREWs Easy HandleAdditional Parts Reversing the Door SwingDisassembly of the Fridge Door Disconnect electric wires insideAfter removing screws, disassemble Assy Hange MID Disassembly of the Freezer DoorAssembly of the Fridge Door Assemble the Assy Hinge MID with a screw and two boltsFit the Fridge door into the Assy Hinge MID Switch the position of the CAP Hole Hinge UPP Assembly of the Freezer DoorExchange the positions of a bolt Fit the Freezer Door into the Assy Hinge MIDReversing the Handle BAR Unfasten the Foot Front to fitAssemble the Assy Hinge LOW as shown below with a wrench Problems and Solutions Food in the refrigerator is frozenThere are unusual noises Tips Power Saving Tips Usage PrecautionsYou can hear a liquid babbling in the appliance There is a bad smell inside the applianceView of Your Fridge / Freezer Ambient Room Temperature Limits