CARE AND CLEANING
To Clean Hood Surface
•For general care, wipe the outside of the stainless steel with sudsy water or household cleaners such as Fantastic® or Formula 409®, rinse well and dry with a clean soft cloth to avoid water marks.
•Wipe and dry stainless steel in the same direction as the grain. Avoid using too much pressure, which may mar the surface.
•Do not use abrasive products such as steel wool.
•To remove finger prints and give added shine, use spray cleaners such as Stainless Steel Magic® and Shimmer®.
•Do not allow any cleaning compounds to remain in contact with stainless steel for extended periods.
To Clean Filters and Troughs
Your hood has removable aluminum filters, grease troughs and side panels. They must be cleaned when the filter light illuminates on the control panel or whenever they collect the grease. When used over a grill, wok or other high grease applications, more frequent cleaning may be required.
To Remove Filters and Grease Troughs:
•Turn the fan and lights off. Be sure filters are cool and grease has congealed before removal.
•Remove in the following order:
1.Filters - Start with center filters, push up, then pull out from the bottom.
2.Side Panels - Remove these the same way as the filters.
3.Grease Troughs - lift up and out.
•The filters can be washed by hand or in the dishwasher.
Reverse the above directions to reinsert the trough, filters and side panels.
Note: Depending upon the size and model of hood, there will be anywhere from 2 to 8 filters per hood.
|
|
|
|
|
| ® |
1 | 2 | 3 |
|
|
|
|
OFF | FAN | DELA |
| FIL |
| LIGHT |
|
| |||||
| SPEED | SHUT OFF |
|
|
| |
Figure 3
NOTE: DO NOT USE COOKTOP WHILE HOOD IS DISASSEMBLED. GREASE TROUGHS MUST BE IN PLACE BEFORE INSTALLING THE ALUMINUM FILTERS.
| 1 | 1 |
|
| |
2 |
| 2 |
| Filters |
Side | Filters | Side | |
Panel | Panel | ||
|
Grease Trough
Figure 4
PAGE 6