11.People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close prox- imity to heart pacemaker could cause pacemaker interference or pacemak- er failure. In addition, people with pacemakers should:
•Avoid operating alone.
•Do not use with Power Switch (19) locked on.
•Properly maintain and inspect to avoid electrical shock.
•Any Power Cord (21) must be prop- erly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.
12.WARNING: Handling the Powr Cord (21) on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproduc- tive harm. Wash hands after han- dling. (California Health & Safety Code § 25249.5, et seq.)
13.The warnings, precautions, and in- structions discussed in this instruction manual cannot cover all possible con- ditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Save these instructions.
Grounding
To prevent electric shock
and death from incorrect grounding wire connection: Check with a qualified electrician if you are in doubt as to whether the Outlet is properly grounded. Do not modify the Power Cord Plug
(21)provided with the tool. Never remove the grounding prong from the Plug. Do not use the tool if the Power Cord or Plug is damaged. If damaged, have it repaired by a service facility before use. If the Plug will not fit the Outlet, have a proper Outlet installed by a qualified electrician.
Grounded Tools: Tools with Three
Prong Plugs
1.Tools marked with “Grounding Re- quired” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low re- sistance path to carry electricity away from the user, reducing the risk of
SKU 66182 | For technical questions, please call | Page 5 |