Symbology
Double Insulated
| Canadian Standards Association |
|
|
| Underwriters Laboratories, Inc. |
|
|
V~ | Volts Alternating Current |
A | Amperes |
| |
|
|
n0 xxxx/min. | No Load Revolutions per Minute |
(RPM) |
PRODUCT FEATURES
FIGURE A
TEMPERATURE | POWER ON | BLADE |
ADJUSTING KNOB | LIGHT | (2) |
(9)(22)
|
| CLAMPING |
|
| |
|
|
|
| ||
|
| SCREW |
|
| |
|
| SCALE | |||
|
| (3) | |||
POWER SWITCH | |||||
BRACKET | |||||
| |||||
(19) |
| (1) | |||
Specifications
| 120 V~ / 60 Hz / 130 Watts | |
| Power Switch: Push Button ON/OFF | |
Electrical | Power Cord: 18 AWG x 3C | |
Requirements | Power Plug: | |
| Internal Temperature Control: Rheostat | |
| Power Indicator Light: Red L.E.D. | |
Product | Sharp edge of Blade for line cutting. | |
Applications | Side of Blade for wide groove cutting. | |
Cutting Depth | ||
Adjustments | ||
| ||
Temperature | ||
Ranges | ||
| ||
| ||
.Additional | Push Button, momentary, ON/OFF | |
Power Switch (Automatically returns to | ||
Features | ||
OFF position when released). | ||
|
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch (19) of the tool to its “OFF” position and unplug the tool from its electrical Outlet before performing any inspection, maintenance, or cleaning procedures.
To Adjust The Cutting Depth:
1.The cutting depth of the Hot Knife may be adjusted up to
SKU 66182 | For technical questions, please call | Page 7 |