Philips MRD120 manual Troubleshooting, Problem, Solution

Page 32

E n g l i s h

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, please consult your dealer or Magnavox for help.

Problem

No power.

No picture.

Completely distorted picture or black/white picture.

The aspect ratio of the screen cannot be changed even though you have set the TV display.

No sound or distorted sound.

The DVD system does not work.

The disc tray cannot open and “TRAY LOCKED” is displayed.

Solution

Check if the AC power cord is properly connected.

Press the STANDBY ON on the front of the DVD system to turn on the power.

Refer to your TV’s manual for correct Video In channel selection. Change the TV channel until you see the DVD screen.

Press DISC on the remote.

Switch the P-SCAN at the back panel to “OFF” position if you are not using a Progressive Scan TV.

If this happens when you changing the setting of the ‘TV SYSTEM’, wait for 15 seconds for auto recovery.

Check the video connection.

Sometimes a small amount of picture distortion may appear. This is not a malfunction.

Clean the disc.

The aspect ratio is fixed on the DVD disc.

Depending on the TV, it may not be possible to change the aspect ratio.

Adjust the volume.

Check the speaker connections and settings.

Disconnect the headphones.

Press the correct source button on the remote (TV/AV or AUX, for example) to choose the equipment that you want to hear through the DVD system.

Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try to operate again as usual.

Press and hold SOURCE button on the front panel for more than two seconds, then press PLAY button.

32

Image 32
Contents User guide México Português Español English IndexEnvironmental information Contents Supplied accessories Care and safety informationGeneral Information EnglishConnections Placing the speakers and subwooferConnecting speakers and subwoofer Helpful HintConnecting TV Using Composite Video jackSet the P-SCANswitch to ‘OFF’ Using Component Video jack Pr/Cr Pb /Cb YUsing S-Video jack Using an accessory RF modulatorConnecting FM/MW Antennas Power cord Plug in the AC power cord to the power outletUsing the VCR for recording DVD playback Viewing and listening to the playbackConnect the VCR or Cable/Satellite Box to the TV as shown Pr/Cr Pb/Cb Y video connectionMain unit and remote control Functional OverviewRepeat Repeat A-BRear + Center +Setting the TV Inserting batteries into the remote controlUsing the remote control to operate the system Getting StartedSetting the TV shape Selecting the colour system that corresponds to your TVMove to Press Move to TV System and press Move to Press Move to TV Shape and pressSetting the speakers Adjusting the delay timeAdjusting the speaker output levels Test Tone Turning on/offSetting language preferences On-screen display OSD languageAudio, Subtitle and Disc menu languages System MenuDisc Operations Playable discsPlaying discs Your DVD home cinema system will playResuming playback from the last stopped point DVD/VCD/CD Using the Disc MenuBasic playback controls Repeat play mode Selecting various repeat functionsProgramme favourite tracks audio CDs and VCDs Repeating a section within a chapter/trackUsing the menu bar to programme Playing MP3/Picture disc Kodak, JpegTo clear the programme Stop playback, then press ÇagainPress System Menu again to remove the menu DVD Setup Menu OptionsUsing the menu bar Setting the video output Picture Setup Sound Setup Language Setup Feature SetupVideo PR PB Y / ScartOFF ALLPCM 96 kHz PCM 48 kHzReset Night mode turning on/offRestoring to original settings Rating explanations G l i s h Restricting playback by Parental ControlMove to and press Move to Parental and press Changing the password Tuning to radio stations Presetting radio stationsSelecting a preset radio station Tuner OperationsChanging tuning grid Setting the Sleep TimerTo check or change the setting To cancel the sleep timerVolume control Using the remote to operate ‘Philips’ televisionSound Control Dimming system’s display screenSpecifications Solution TroubleshootingProblem Press System Setup to turn off the setup menu screen Glossary Glossary Composite See next12nc 8239 300 No picture? Using the DVD setup menuPlaying a disc En primer lugar conecte Después reproduzca¿No imagen Consejo útilesPrimeiro, conecte Depois divirta-seImagem não aparece? Dicas úteis

MRD120 specifications

The Philips MRD120 is a cutting-edge digital MRI system designed to offer unparalleled imaging quality and efficiency in a variety of clinical settings. Utilizing advanced magnetic resonance imaging technology, the MRD120 delivers high-resolution images that enable accurate diagnosis and treatment planning, making it an essential tool in modern healthcare.

One of the standout features of the MRD120 is its powerful magnet system, which operates at 1.5 Tesla. This magnetic strength allows for superior image contrast and resolution, facilitating detailed examinations of soft tissues, organs, and the central nervous system. Patients benefit from enhanced imaging capabilities that improve diagnostic accuracy and assist in identifying pathologies effectively.

The MRD120 is engineered with versatility in mind. It supports a wide range of imaging protocols, including brain, spine, musculoskeletal, and vascular imaging. The machine's flexibility makes it suitable for diverse patient populations and clinical needs, catering to both routine examinations and specialized studies. Moreover, the system is equipped with multiple coils for various anatomical regions, ensuring optimal coverage and image quality.

Another significant aspect of the Philips MRD120 is its patient-centric design. The system features a spacious, open magnet configuration that allows for better patient comfort and reduces anxiety during scanning procedures. The wider bore design accommodates a diverse range of body sizes, making it an inclusive choice for healthcare facilities.

In addition to comfort, the MRD120 incorporates advanced imaging technologies such as Parallel Imaging and dStream technology. Parallel Imaging accelerates scan times and enhances image quality by utilizing multiple channels of data simultaneously. dStream technology further improves the signal-to-noise ratio, providing clearer images even in challenging cases. These advancements not only streamline workflows but also minimize the time patients spend in the scanner.

User experience is also a priority for the MRD120. The intuitive interface and streamlined workflows enable radiologists and technicians to operate the system efficiently, reducing training time and increasing productivity. Its advanced post-processing capabilities allow for intricate image analysis and reconstruction, providing specialists with the tools necessary for comprehensive evaluations.

In summary, the Philips MRD120 combines state-of-the-art imaging technology, patient-centered design, and user-friendly operation to redefine the MRI experience. With its high magnet strength, versatility, and advanced imaging features, the MRD120 stands as a crucial asset in delivering high-quality healthcare services.