Philips MRD120 manual Glossary

Page 34

Glossary

E n g l i s h

Analogue: Sound that has not been turned into numbers. Analogue sound varies, while digital sound has specific numerical values.

These jacks send audio through two channels, the left and right.

Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image.The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9.

AUDIO OUT Jacks: Red and white jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.)

Bit Rate: The amount of data used to hold a given length of music; measured in kilobits per second, or kbps. Or, the speed at which you record. Generally, the higher the bit rate, or the higher the recording speed, the better the sound quality. However, higher bit rates use more space on a Disc.

Chapter: Sections of a picture or a music piece on a DVD that are smaller than titles. A title is composed of several chapters. Each chapter is assigned a chapter number enabling you to locate the chapter you want.

Component Video Out Jacks: Red, blue, and green jacks on the back of the DVD System that send high-quality video to a TV that has Component Video In jacks (R/G/B, Y/Pb/Pr,YUV, etc.)

Disc menu: A screen display prepared for allowing selection of images, sounds, subtitles, multi-angles, etc recorded on a DVD.

Digital: Sound that has been converted into numerical values. Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks.These jacks send audio through multiple channels, instead of just two channels as analogue does.

Dolby Digital: A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio (front left and right, surround left and right, centre and subwoofer).

Dolby Pro Logic II: It creates five full- bandwidth output channels from two-channel sources. Decode only systems that derive 5.1 channels instead of the conventional four channels of Dolby Pro Logic surround sound.

JPEG: A very common digital still picture format.A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio.

MP3: A file format with a sound data compression system. “MP3” is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. By using the MP3 format. One CD-R or CD-RW can contain about 10 times more data then a regular CD.

Parental control: Limits Disc play according to the age of the users or the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback will be prohibited if the software’s level is higher than the user-set level.

PCM (Pulse Code Modulation): A system for converting analog sound signal to digital signal for later processing, with no data compression used in conversion.

Playback control (PBC): Refers to the signal recorded on video CDs or SVCDs for controlling playback. By using menu screens recorded on a Video CD or SVCD that supports PBC, you can enjoy interactive playback and searching.

Progressive Scan: It displays all the horizontal lines of a picture at one time, as a single frame. This system can convert the interlaced video from DVD into progressive format when the DVD Player is connected to a Progressive Scan TV. It dramatically increases the vertical resolution and provides the best picture.

Region code: A system allowing discs to be played only in the region designated.This unit will only play discs that have compatible region codes. You can find the region code of your unit by looking on the product label. Some discs are compatible with more than one region (or ALL regions).

34

Image 34
Contents User guide México Environmental information IndexPortuguês Español English Contents General Information Supplied accessoriesCare and safety information EnglishConnections Placing the speakers and subwooferConnecting speakers and subwoofer Helpful HintSet the P-SCANswitch to ‘OFF’ Connecting TVUsing Composite Video jack Using Component Video jack Pr/Cr Pb /Cb YUsing S-Video jack Using an accessory RF modulatorConnecting FM/MW Antennas Power cord Plug in the AC power cord to the power outletConnect the VCR or Cable/Satellite Box to the TV as shown Using the VCR for recording DVD playbackViewing and listening to the playback Pr/Cr Pb/Cb Y video connectionMain unit and remote control Functional OverviewRear + RepeatRepeat A-B Center +Using the remote control to operate the system Setting the TVInserting batteries into the remote control Getting StartedMove to Press Move to TV System and press Setting the TV shapeSelecting the colour system that corresponds to your TV Move to Press Move to TV Shape and pressAdjusting the speaker output levels Setting the speakersAdjusting the delay time Test Tone Turning on/offAudio, Subtitle and Disc menu languages Setting language preferencesOn-screen display OSD language System MenuPlaying discs Disc OperationsPlayable discs Your DVD home cinema system will playBasic playback controls Using the Disc MenuResuming playback from the last stopped point DVD/VCD/CD Programme favourite tracks audio CDs and VCDs Repeat play modeSelecting various repeat functions Repeating a section within a chapter/trackTo clear the programme Using the menu bar to programmePlaying MP3/Picture disc Kodak, Jpeg Stop playback, then press ÇagainUsing the menu bar DVD Setup Menu OptionsPress System Menu again to remove the menu Video Setting the video outputPicture Setup Sound Setup Language Setup Feature Setup PR PB Y / ScartPCM 96 kHz OFFALL PCM 48 kHzRestoring to original settings Night mode turning on/offReset Move to and press Move to Parental and press G l i s h Restricting playback by Parental ControlRating explanations Changing the password Selecting a preset radio station Tuning to radio stationsPresetting radio stations Tuner OperationsTo check or change the setting Changing tuning gridSetting the Sleep Timer To cancel the sleep timerSound Control Volume controlUsing the remote to operate ‘Philips’ television Dimming system’s display screenSpecifications Problem TroubleshootingSolution Press System Setup to turn off the setup menu screen Glossary Glossary 12nc 8239 300 See nextComposite Playing a disc Using the DVD setup menuNo picture? ¿No imagen En primer lugar conecteDespués reproduzca Consejo útilesImagem não aparece? Primeiro, conecteDepois divirta-se Dicas úteis

MRD120 specifications

The Philips MRD120 is a cutting-edge digital MRI system designed to offer unparalleled imaging quality and efficiency in a variety of clinical settings. Utilizing advanced magnetic resonance imaging technology, the MRD120 delivers high-resolution images that enable accurate diagnosis and treatment planning, making it an essential tool in modern healthcare.

One of the standout features of the MRD120 is its powerful magnet system, which operates at 1.5 Tesla. This magnetic strength allows for superior image contrast and resolution, facilitating detailed examinations of soft tissues, organs, and the central nervous system. Patients benefit from enhanced imaging capabilities that improve diagnostic accuracy and assist in identifying pathologies effectively.

The MRD120 is engineered with versatility in mind. It supports a wide range of imaging protocols, including brain, spine, musculoskeletal, and vascular imaging. The machine's flexibility makes it suitable for diverse patient populations and clinical needs, catering to both routine examinations and specialized studies. Moreover, the system is equipped with multiple coils for various anatomical regions, ensuring optimal coverage and image quality.

Another significant aspect of the Philips MRD120 is its patient-centric design. The system features a spacious, open magnet configuration that allows for better patient comfort and reduces anxiety during scanning procedures. The wider bore design accommodates a diverse range of body sizes, making it an inclusive choice for healthcare facilities.

In addition to comfort, the MRD120 incorporates advanced imaging technologies such as Parallel Imaging and dStream technology. Parallel Imaging accelerates scan times and enhances image quality by utilizing multiple channels of data simultaneously. dStream technology further improves the signal-to-noise ratio, providing clearer images even in challenging cases. These advancements not only streamline workflows but also minimize the time patients spend in the scanner.

User experience is also a priority for the MRD120. The intuitive interface and streamlined workflows enable radiologists and technicians to operate the system efficiently, reducing training time and increasing productivity. Its advanced post-processing capabilities allow for intricate image analysis and reconstruction, providing specialists with the tools necessary for comprehensive evaluations.

In summary, the Philips MRD120 combines state-of-the-art imaging technology, patient-centered design, and user-friendly operation to redefine the MRI experience. With its high magnet strength, versatility, and advanced imaging features, the MRD120 stands as a crucial asset in delivering high-quality healthcare services.