Philips MRD120 manual Press System Setup to turn off the setup menu screen

Page 33

Troubleshooting

Problem

The DVD player does not start playback.

Cannot activate some features, such as Angles, Subtitles, or multi-language Audio.

There is no sound from the centre and rear speakers.

Radio reception is poor.

The remote control does not function properly.

The display panel is dark.

Low hum or buzz sound.

Solution

–Insert a readable disc with the playback side facing down. The DVD+R/CD-R must be finalised.

–Check the disc type, colour system and region code.

–Check for any scratches or smudges on the disc.

–Press SYSTEM SETUP to turn off the setup menu screen.

–You may need to enter the password in order to change the parental control rating level or to unlock the disc for playback.

–Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour.

–The features may not be available on the DVD.

–Changing the language for the sound or subtitle is prohibited on the DVD.

–Press CENTER +- or REAR +- to adjust the volume level.

–Make sure the centre and rear speakers are connected correctly.

–Press SURROUND button to select a correct surround sound setting.

–Make sure the source you are playing is recorded or broadcast in surround sound (DPL II, Dolby Digital, etc.)

–If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

–Increase the distance between the system and your TV or VCR.

–Tune in to the correct frequency.

–Place the antenna farther away from any equipment that may be causing the noise.

–Select the source (DISC or TUNER, for

example) before pressing the function button (ÉÅ, S, T).

–Reduce the distance between the remote control and the system.

–Replace the batteries with new ones.

–Point the remote control directly toward the IR sensor.

–Check that the batteries are loaded correctly.

–Press DIM again.

–Place the DVD system as far away as possible from electrical devices that may be causing interference.

E n g l i s h

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents User guide México Index Environmental informationPortuguês Español English Contents Care and safety information Supplied accessoriesGeneral Information EnglishPlacing the speakers and subwoofer ConnectionsHelpful Hint Connecting speakers and subwooferUsing Composite Video jack Connecting TVSet the P-SCANswitch to ‘OFF’ Using Component Video jack Pr/Cr Pb /Cb YUsing an accessory RF modulator Using S-Video jackPlug in the AC power cord to the power outlet Connecting FM/MW Antennas Power cordViewing and listening to the playback Using the VCR for recording DVD playbackConnect the VCR or Cable/Satellite Box to the TV as shown Pr/Cr Pb/Cb Y video connectionFunctional Overview Main unit and remote controlRepeat A-B RepeatRear + Center +Inserting batteries into the remote control Setting the TVUsing the remote control to operate the system Getting StartedSelecting the colour system that corresponds to your TV Setting the TV shapeMove to Press Move to TV System and press Move to Press Move to TV Shape and pressAdjusting the delay time Setting the speakersAdjusting the speaker output levels Test Tone Turning on/offOn-screen display OSD language Setting language preferencesAudio, Subtitle and Disc menu languages System MenuPlayable discs Disc OperationsPlaying discs Your DVD home cinema system will playUsing the Disc Menu Basic playback controlsResuming playback from the last stopped point DVD/VCD/CD Selecting various repeat functions Repeat play modeProgramme favourite tracks audio CDs and VCDs Repeating a section within a chapter/trackPlaying MP3/Picture disc Kodak, Jpeg Using the menu bar to programmeTo clear the programme Stop playback, then press ÇagainDVD Setup Menu Options Using the menu barPress System Menu again to remove the menu Picture Setup Sound Setup Language Setup Feature Setup Setting the video outputVideo PR PB Y / ScartALL OFFPCM 96 kHz PCM 48 kHzNight mode turning on/off Restoring to original settingsReset G l i s h Restricting playback by Parental Control Move to and press Move to Parental and pressRating explanations Changing the password Presetting radio stations Tuning to radio stationsSelecting a preset radio station Tuner OperationsSetting the Sleep Timer Changing tuning gridTo check or change the setting To cancel the sleep timerUsing the remote to operate ‘Philips’ television Volume controlSound Control Dimming system’s display screenSpecifications Troubleshooting ProblemSolution Press System Setup to turn off the setup menu screen Glossary Glossary See next 12nc 8239 300Composite Using the DVD setup menu Playing a discNo picture? Después reproduzca En primer lugar conecte¿No imagen Consejo útilesDepois divirta-se Primeiro, conecteImagem não aparece? Dicas úteis

MRD120 specifications

The Philips MRD120 is a cutting-edge digital MRI system designed to offer unparalleled imaging quality and efficiency in a variety of clinical settings. Utilizing advanced magnetic resonance imaging technology, the MRD120 delivers high-resolution images that enable accurate diagnosis and treatment planning, making it an essential tool in modern healthcare.

One of the standout features of the MRD120 is its powerful magnet system, which operates at 1.5 Tesla. This magnetic strength allows for superior image contrast and resolution, facilitating detailed examinations of soft tissues, organs, and the central nervous system. Patients benefit from enhanced imaging capabilities that improve diagnostic accuracy and assist in identifying pathologies effectively.

The MRD120 is engineered with versatility in mind. It supports a wide range of imaging protocols, including brain, spine, musculoskeletal, and vascular imaging. The machine's flexibility makes it suitable for diverse patient populations and clinical needs, catering to both routine examinations and specialized studies. Moreover, the system is equipped with multiple coils for various anatomical regions, ensuring optimal coverage and image quality.

Another significant aspect of the Philips MRD120 is its patient-centric design. The system features a spacious, open magnet configuration that allows for better patient comfort and reduces anxiety during scanning procedures. The wider bore design accommodates a diverse range of body sizes, making it an inclusive choice for healthcare facilities.

In addition to comfort, the MRD120 incorporates advanced imaging technologies such as Parallel Imaging and dStream technology. Parallel Imaging accelerates scan times and enhances image quality by utilizing multiple channels of data simultaneously. dStream technology further improves the signal-to-noise ratio, providing clearer images even in challenging cases. These advancements not only streamline workflows but also minimize the time patients spend in the scanner.

User experience is also a priority for the MRD120. The intuitive interface and streamlined workflows enable radiologists and technicians to operate the system efficiently, reducing training time and increasing productivity. Its advanced post-processing capabilities allow for intricate image analysis and reconstruction, providing specialists with the tools necessary for comprehensive evaluations.

In summary, the Philips MRD120 combines state-of-the-art imaging technology, patient-centered design, and user-friendly operation to redefine the MRI experience. With its high magnet strength, versatility, and advanced imaging features, the MRD120 stands as a crucial asset in delivering high-quality healthcare services.
Top Page Image Contents