CDA FW221 Care and cleaning, Changing the light bulb, Disconnect the appliance from the power

Page 4

Care and cleaning

Always disconnect the appliance from the power before any cleaning or maintenance.

The refrigerator section should be cleaned using a solution of bicarbonate of soda and lukewarm water.

Do not use abrasive products or detergents. After washing, rinse and dry thoroughly.

Clean the shelves and balconies separately by hand using soap and water. Do not put them in the dishwasher.

The evaporating tray and water drain hole (at the back of the refrigerator compartment) should be cleaned periodically to prevent the defrosted water from collecting inside the refrigerator compartment. The drain plug can be used to clear the drain hole.

Once cleaning is complete, reconnect the mains power supply.

If the appliance is not used for prolonged periods of time, unplug and clean the appliance. The doors should be left slightly open to prevent the formation of mildew and smell.

Changing the light bulb

Disconnect the appliance from the power.

Remove the light cover.

Unscrew the light bulb to remove it and replace with a new bulb (not more than 15W).

Replace the light cover and reconnect the power after five minutes’ delay as explained on page 3.

Image 4
Contents FW221 integrated under counter larder fridge Appliance information CE Declarations of ConformitySetting the temperature Before first useDefrosting the fridge UseDisconnect the appliance from the power Care and cleaningChanging the light bulb Troubleshooting If the appliance is not workingAppliance is working, but not very well Appliance is noisyInstallation Dimensions of the applianceReversing the door Do not turn the door upside downInstalling the decor door Installing under a worktop Adjusting the plinth depth figureAdjusting the decor door Never cover over the ventilation slotsElectrical information Customer Care Department 01949 862