CDA FW221 manual Installation, Dimensions of the appliance

Page 6

Installation

This appliance must never be installed close to heat sources i.e. heating elements, cookers or in damp places

The appliance should be mounted on a piece of wood (for example a section of worktop or kitchen carcass) if a raised floor is to be fitted, if the kitchen floor is to be tiled after installation, or if the installation height of the appliance is greater than 850 mm.

Fig. 1 - Dimensions of the appliance.

Fig. 2 - Dimensions for installation in adjacent units.

fig. 1

fig. 2

Image 6

Contents FW221 integrated under counter larder fridge Appliance information CE Declarations of ConformityDefrosting the fridge Setting the temperatureBefore first use UseCare and cleaning Disconnect the appliance from the powerChanging the light bulb Appliance is working, but not very well TroubleshootingIf the appliance is not working Appliance is noisyInstallation Dimensions of the applianceReversing the door Do not turn the door upside downInstalling the decor door Adjusting the decor door Installing under a worktopAdjusting the plinth depth figure Never cover over the ventilation slotsElectrical information Customer Care Department 01949 862