Alto-Shaam 2020, VHes-10, VHes-5, 1220, 610, 714 Positioning on site, Minimum Clearance Requirements

Page 6

i n s t a l l a t i o n

site INSTALLATION

c a u t i o n

THE APPLIANCE MUST REMAIN ON

THE PALLET WHILE BEING MOVED

TO THE INSTALLATION SITE BY FORK

LIFT OR PALLET LIFT TRUCK.

NOTE: Note dimensions required for doorways and aisles for access of the oven and pallet to the installation site. Transport the oven in an upright and level position only. Do not tilt the oven.

NOTE: To avoid equipment damage, observe attention label on oven for area to avoid with lifting fork.

Positioning on site

Stand the oven in a level position. Use the adjustable feet to overcome an uneven floor and ensure that the unit is level.

It is strongly recommended that table top models be mounted on a factory supplied stand or a stand that is stable, open, and level. Recommended height is 23-inches (584mm).

Adjust the height of floor models for smooth access of the trolley or cart. When positioning the oven, observe the minimum space allocation requirements shown.

To insure proper operation, the installation of this oven must be completed by qualified technicians in accordance with the instructions provided in this manual. Failure to follow the instructions provided may result in damage to the oven, building, or cause personal injury to personnel.

MINIMUM CLEARANCE REQUIREMENTS

left side

6" (152mm) minimum

 

18" (457mm) service access recommended

 

20" (508mm) from heat producing equipment

right side

4" (102mm)

back

4" (102mm) for plumbing

top

20" (508mm) for air movement

NOTE: Additional clearance is needed for service access. A minimum distance of 18-inches is strongly recommended. If adequate service clearance is not provided, it will be necessary to disconnect the gas, water, and drain to move the oven with a fork lift for service access. Charges in connection with inadequate service access is not covered under warranty.

Combitouch® ES series • electric INSTALLATION MANUAL • 4..

Image 6
Contents ES electric Installation L i v e r y P a c k i n gSafety procedures and precautions N g e rSite Installation Installation codes & StandardsVentilation requirements Positioning on site Minimum Clearance RequirementsLifting Instructions Positioning requirements Common specifications 610, 714, 1018 CombiGuard610es 610ES Touch610ES 610esi 610ESi Touch610ESi 610esiN 610ESiN Touch610ESiN 1010es 1010ES Touch1010ES 1010esi 1010ESi Touch1010ESi 1010esiN 33 837mm714es 714ES Touch714ES 714ESi Touch 714ESi1018es 1018ES Touch1018ES 1018esi 1018ESi Touch1018ESi 1220es 1220ES Touch1220ES 1220esi 1220ESi Touch1220ESi 2020es 2020ES Touch2020ES 2020esi 2020ESi Touch2020ESi Hard wired models Electrical connectionTerminal Block Ground Electrical Connection Mobile equipment restraint Risk of electric shockWater quality requirement Water connections Water requirements Two 2 cold water inlets drinking qualityWater Valve Water drainageOn/O Combitouch checklist ClearancesError codes Press the Start Icon to Acknowledge the ErrorE15 E51 E93 Combitouch motor control error codes Press the Start Icon to Acknowledge the Error Ventless hood option Condensate drainVentless Hood Power Knob OperationOriginal equipment limited warranty TRansportation damage and claims
Related manuals
Manual 39 pages 38.94 Kb Manual 36 pages 33.23 Kb

1018, 2020, 1010, COMBITHERM COMBINATION Oven / Steamer ES electric combitouch, 714 specifications

Alto-Shaam is known for its innovative cooking and holding equipment designed for the foodservice industry, and their VHes product line is no exception. This range includes models VHes-10, VHes-5, 1220, 610, and 714, each built with unique features and advanced technologies to meet the demands of modern kitchens.

The VHes-10 and VHes-5 models are equipped with Alto-Shaam’s exclusive Halo Heat technology, which provides precise temperature control and ensures even heat distribution. This technology gently holds food at the perfect serving temperature without drying it out, enhancing both flavor and texture. These models also feature Energy Star certification, reflecting their energy-efficient design, which helps kitchens reduce operational costs while supporting sustainability goals.

The VHes-10 boasts a larger capacity, capable of accommodating more food items, while the VHes-5 is designed for smaller operations or limited spaces, providing versatility in the kitchen. Both models come with digital control panels for easy temperature adjustments and monitoring, ensuring that chefs can maintain optimal conditions at all times.

Moving on to the 1220, 610, and 714 models, these units cater to diverse holding needs within foodservice operations. Each model is designed to be user-friendly, with clear digital displays and intuitive controls that allow chefs to quickly set and adjust holding temperatures. The 1220 model is particularly popular for its spacious design, which supports larger quantities of food, making it ideal for bustling kitchens and catered events.

The 610 and 714 models are engineered for flexibility, allowing operators to effectively manage their food items in various settings. Their compact sizes combined with smart technology make them an excellent choice for both front-line service environments and back-of-house operations. Notably, all these models support multiple food types, enabling establishments to hold everything from vegetables to protein dishes without compromising quality.

In summary, Alto-Shaam’s VHes series, including the VHes-10, VHes-5, 1220, 610, and 714, integrates cutting-edge technologies such as Halo Heat and efficient designs into versatile equipment. With an emphasis on energy savings, precise temperature control, and user convenience, these models are vital for any foodservice operation seeking to elevate their food holding and serving capabilities.