Philips MX3600 warranty Hookups TV cont’d, Connecting to a TV with Component Video In Jacks

Page 11

Hookups - TV (cont’d) 11

Connecting to a TV with

Component Video In Jacks

1

Red & White

Component Video Cable

Audio Cable

 

Back of TV

(example only)

3 2

Pr/Cr Pb/Cb Y

Rear of DVD Receiver

3

Connect the DVD Receiver’s Pr/Cr Pb/Cb Y COMPONENT

1 VIDEO OUT jacks to the matching Pr/Cr Pb/Cb Y VIDEO IN jacks on the TV. You will need a component video cable (Green-Y; Blue- Pb/Cb; Red- Pr/Cr) (not supplied). Match the cable colors to the jack colors.

To hear TV channels through the DVD Home Cinema System,

2 connect the supplied red and white audio cables to the DVD Receiver’s red/white, right/left (TV) AUDIO IN jacks and to the TV’S right/left AUDIO OUT jacks. Match the cable colors to the jack colors.

Connect the power cords of the DVD Receiver and TV to a

3 power outlet.

Turn on the TV and set it to the correct Component Video

4 In channel. Go to the lowest TV channel and change channels down until you find the Component Video In channel. (It is not channel 3 or 4 as it might be when using a VCR.) See your TV owner’s manual for details.

Press STANDBY-ONy on the front of the DVD Receiver to

5 turn on the DVD Receiver. The red Standby light will disappear. 6 Set VIDEO OUT to PR PB Y. Details are on page 29.

TV SHAPE

 

TV SYSTEM

 

 

 

 

VIDEO OUT

S-VIDEO

SCR SAVER

PR PB Y/SCART

PR PB Y

 

 

Helpful Hint

On the TV, the Component Video In jacks may be labeled YUV or Pr/Cr Pb/Cb Y and may be red, blue, and green.

Image 11
Contents MX3600D MX3700D Model No Serial No Registration Card within 10 days. So please mailExclamation point calls Table of Contents Federal Communications Commission FCC Safety InformationInstallation Copyright ProtectionIntroduction Remote Control Front Panel Connect to a standard AC outlet Rear PanelAntenna Connections First Time SetupWhere Do You Start? Turn on the TV and set it to the correct Video In channel Connecting to a TV with a Composite yellow Video In JackHookups TV To hear TV channels through the DVD Home Cinema SystemTurn on the TV and set it to the correct Component Video Connecting to a TV with Component Video In JacksHookups TV cont’d Connect the DVD Receiver’s Pr/Cr Pb/Cb Y ComponentIt is not necessary to set Video OUT to S-VIDEO Connecting to a TV with an S-Video In jackTurn on the TV and set it to the correct S-Video In chan Hookups Speakers Connecting the SpeakersConnect the DVD Receiver’s Audio OUT jacks to Connecting to a TV and Optional Audio EquipmentHookups Optional Connect the DVD Receiver to a TV as shown on pagesConnect the DVD Receiver’s Video OUT jack to the Video Connecting to a VCR or Cable/Satellite BoxConnect the DVD Receiver’s Audio OUT L/R jacks to Audio in L/R jacks on the VCRDVD Disc Menus Quick Disc PlaybackPausing Playback Playback FeaturesTo exit, press System Menu or OK System MenuSystem Menu Icons Press System Menu Subtitles, Audio LanguageSubtitles Audio LanguageSearching Slow Motion, SearchingSlow Motion Press System Menu to remove the Menu Bar Title/Chapter Selection, Time SearchTitle/Chapter Selection Press System Menu Press or to select Title orZoom Status, ZoomStatus Step Angle, StepAngle Press or to select Press 9 to select PBC on or PBC OFF Playback Control, MP3 FeaturesMP3 Features Playback Control Video CD onlyTo resume regular playback, press Repeat A-B again Repeat, Repeat A-BDuring DVD playback, press Repeat on the remote to play a During Video CD, Audio CD, or MP3 playback, pressWhile playback is stopped, press Program on the DVD Favorite Track SelectionTV System NTSC, PAL TV Shape Scart option is not available for this DVD Receiver Screen Saver, Video OutScreen Saver Video OutPress 9 repeatedly to select z, then press Digital Output, Night ModeNight Mode Digital OutputChoose Test Tone if you Speaker SettingsChoose Rear Delay if While playback is stopped, press System MENU. PressDVD Audio, Subtitle, and Disc Menu Languages Language SettingsPress 9 or 8 to select a Parental Control Level, then press Press the Number buttons 0-9 on the remote control toParental Control Levels Parental will be selected. PressAre asked to enter the code for the first time Parental Control Password, DefaultsParental Control Password DefaultsChanging Surround Speaker Volume Levels Audio and Sound FeaturesAdjusting the Volume Adjusting Bass and TreblePress Surround repeatedly to select a surround sound Surround Sound OptionsSelecting Surround Sound Programming Radio Stations Tuning Radio StationsSelecting Preset Radio Stations Radio StationsSleep Timer Helpful Hints Helpful Hints cont’d Center Speaker SpecificationsSpecifications are subject to change without notice Front speakers/Surround speakerCD Compact Disc audio GlossaryZoom IndexAudio System Limited Warranty