Philips MX3600 warranty Hookups TV, Connecting to a TV with a Composite yellow Video In Jack

Page 10

ANTENNA IN

75

10 Hookups - TV

Connecting to a TV with a

Composite (yellow) Video In Jack

Yellow Video Cable

1

Red & White

Audio Cable

Back of TV

(example only)

3 2

Pr/Cr Pb/Cb Y

Rear of DVD Receiver	3

Connect the DVD Receiver’s yellow VIDEO OUT jack to

1 the VIDEO IN jack on your TV. Use the supplied composite (yellow) RCA-style video cable.

To hear TV channels through the DVD Home Cinema System,

2 connect the supplied red and white audio cables to the DVD Receiver’s red/white, right/left (TV) AUDIO IN jacks and to the TV’S right/left AUDIO OUT jacks. Match the cable colors to the jack colors.

Connect the power cords of the DVD Receiver and TV to a

3 power outlet.

Turn on the TV and set it to the correct Video In channel.

4 Go to the lowest TV channel and change channels down until you find the Video In channel. (It is not channel 3 or 4 as it might be when using a VCR.) See your TV owner’s manual for details.

Press STANDBY-ONy on the front of the DVD Receiver to

5 turn on the DVD Receiver. The red Standby light will disappear.

Helpful Hints

• If your TV only has a single Antenna In(put) jack, you will need an accessory RF Modulator to view the DVD Playback on your TV. The RF Modulator converts the Video signal output from the Receiver so that it can be played through the TV’s Antenna connector.

•See your electronics retailer or contact Philips for details on RF Modulator availability.

Image 10

Contents MX3600D MX3700D Exclamation point calls Registration Card within 10 days. So please mailModel No Serial No Table of Contents Copyright Protection Safety InformationInstallation Federal Communications Commission FCCIntroduction Remote Control Front Panel Rear Panel Connect to a standard AC outletWhere Do You Start? First Time SetupAntenna Connections To hear TV channels through the DVD Home Cinema System Connecting to a TV with a Composite yellow Video In JackHookups TV Turn on the TV and set it to the correct Video In channelConnect the DVD Receiver’s Pr/Cr Pb/Cb Y Component Connecting to a TV with Component Video In JacksHookups TV cont’d Turn on the TV and set it to the correct Component VideoTurn on the TV and set it to the correct S-Video In chan Connecting to a TV with an S-Video In jackIt is not necessary to set Video OUT to S-VIDEO Connecting the Speakers Hookups SpeakersConnect the DVD Receiver to a TV as shown on pages Connecting to a TV and Optional Audio EquipmentHookups Optional Connect the DVD Receiver’s Audio OUT jacks toAudio in L/R jacks on the VCR Connecting to a VCR or Cable/Satellite BoxConnect the DVD Receiver’s Audio OUT L/R jacks to Connect the DVD Receiver’s Video OUT jack to the VideoQuick Disc Playback DVD Disc MenusPlayback Features Pausing PlaybackSystem Menu Icons System MenuTo exit, press System Menu or OK Audio Language Subtitles, Audio LanguageSubtitles Press System MenuSlow Motion Slow Motion, SearchingSearching Press System Menu Press or to select Title or Title/Chapter Selection, Time SearchTitle/Chapter Selection Press System Menu to remove the Menu BarStatus Status, ZoomZoom Angle Angle, StepStep Playback Control Video CD only Playback Control, MP3 FeaturesMP3 Features Press or to select Press 9 to select PBC on or PBC OFFDuring Video CD, Audio CD, or MP3 playback, press Repeat, Repeat A-BDuring DVD playback, press Repeat on the remote to play a To resume regular playback, press Repeat A-B againFavorite Track Selection While playback is stopped, press Program on the DVDTV System NTSC, PAL TV Shape Video Out Screen Saver, Video OutScreen Saver Scart option is not available for this DVD ReceiverDigital Output Digital Output, Night ModeNight Mode Press 9 repeatedly to select z, then pressWhile playback is stopped, press System MENU. Press Speaker SettingsChoose Rear Delay if Choose Test Tone if youLanguage Settings DVD Audio, Subtitle, and Disc Menu LanguagesParental will be selected. Press Press the Number buttons 0-9 on the remote control toParental Control Levels Press 9 or 8 to select a Parental Control Level, then pressDefaults Parental Control Password, DefaultsParental Control Password Are asked to enter the code for the first timeAdjusting Bass and Treble Audio and Sound FeaturesAdjusting the Volume Changing Surround Speaker Volume LevelsSelecting Surround Sound Surround Sound OptionsPress Surround repeatedly to select a surround sound Radio Stations Tuning Radio StationsSelecting Preset Radio Stations Programming Radio StationsSleep Timer Helpful Hints Helpful Hints cont’d Front speakers/Surround speaker SpecificationsSpecifications are subject to change without notice Center SpeakerGlossary CD Compact Disc audioIndex ZoomLimited Warranty Audio System