Philips MX3600 warranty Hookups Speakers, Connecting the Speakers

Connect the supplied Center speaker to the Green/Black +/- CENTER SPEAKER jacks on the rear of the DVD Receiver.

Hookups - Speakers 13

Connecting the Speakers

Use the supplied speaker wires.

Match the color coded wiring. Connect				1
the +,- terminals on the Receiver (FR, FL,
etc.) to the correct +,- Speaker terminals.					Front Speaker (Right)	Center Speaker
a	.047"(12mm)Connecting SpeakerPUSHINCables				+-	+-
	b	DOWN	c
		PUSH

3	2
Front Speaker (Left)

+-

Subwoofer

6

Subwoofer Power Cord

Power Outlet

4

Pr/Cr Pb/Cb	Y
	Rear of DVD Receiver
Rear Speaker	Rear Speaker
(Surround Right)	(Surround Left)

+ - + -

5

Connect the supplied Front Right speaker to the Red/Black

1 +/- FR (Front Right) SPEAKER jacks on the rear of the DVD Receiver.

Connect the supplied Front Left speaker to the White/Black

2 +/- FL (Front Left) SPEAKER jacks on the rear of the DVD Receiver.

3

Connect the supplied Surround Right speaker to the

4 Gray/Black +/- SR (Surround Right) SPEAKER jacks on the rear of the DVD Receiver.

Connect the supplied Surround Left speaker to the

5 Blue/Black +/- SL (Surround Left) SPEAKER jacks on the rear of the DVD Receiver.

Connect the supplied Subwoofer cable (with RCA plugs on

6 either end) to the WOOFER LINE OUT jack on the DVD Receiver. Then connect the other end of the cable to the AUDIO IN jack on the Subwoofer.

●Connect the Subwoofer’s power cord to a power outlet when connections are complete. Set the Subwoofer’s Volume/On control

to On.

●Select the phase polarity (0° or180°) at the rear of the subwoofer to determine the best bass reproduction effect for certain listening room conditions.

●Press SUBW +/- buttons on the remote to adjust the volume level of the Subwoofer (-15dB to 10dB). SUB +XX DB” is shown in the DVD Receiver’s Display panel.

Rear of MX3600

Woofer Line Out

Volume/On Control