Blomberg IWD 1004 XT, KWD 9440 XA++ Using the water spring, Spillage Tray, Sliding Body Shelves

Page 26

Using the water spring

Warnings

It is normal for the first few glasses of water taken from the dispenser to be warm.

In cases where the water dispenser has not been used frequently, sufficient amount of water must be drained from the dispenser to get fresh water.

Spillage Tray

Water drops that drip during use, accumulates in the spillage tray. You can remove spillage tray by pulling it to yourself. You can remove the water with a sponge or a soft cloth.

Sliding Body Shelves

Sliding body shelves can be pulled by slightly lifting up from the front and moved back and forth. They come to a stop point when pulled towards front to allow you reach the foods placed at the back of the shelf; when it is pulled after slightly lifting upwards at the second stop point, the body shelf will be released.

The shelf should be held tightly from the bottom as well in order to prevent it from tipping over. The body shelf is placed on the rails at the sides of the refrigerator body by bringing it to one lower or one upper level. The body shelf should be pushed backwards to seat it completely.

1 2

3

4

25

EN

Image 26

Contents Page Contents Using your refrigerator Your RefrigeratorYour Refrigerator Optional Intended use Important Safety WarningsGeneral safety Do not put bottled and canned liquidPage Refrigerator door Child safetyHCA Warning Never dispose the product in fireThings to be done for energy saving Always remember InstallationBefore operating your refrigerator Disposing of the packaging Placing and InstallationElectric connection Disposing of your old refrigeratorIf your refrigerator is unbalanced Floor balance adjustmentDoor height adjustment Remove the lower ventilation cover byAdjusting the gap between Situation should be made to take care Because of being wires in the hingeUpper door Some models Installing Water FilterInstallation Requirements Water connection to the refrigeratorConnection of the Water Pipe to the Refrigerator Mode is active before taking out the by- pass cover Compartment by pulling it forward. FigureConnection of the Water Pipe to the Cold Water Mains Line Water filter or installing the by-pass coverConnection of Water Hose to the Jug Prior to first use of Ice/Water Dispenser Separate the union from the tap adaptor. Figure aAlways use the water filter when a jug is not being used Preparation Using your refrigerator Water Dispenser light button Water Dispenser Lights Fresh Freeze Function Setting the fridge compartment temperature Setting the freezer compartment temperature Quick Cool FunctionKey Lock Button Vacation ButtonIonizer Water Dispenser IlluminationUsing the Ice Dispenser Ice OffSliding Body Shelves Using the water springSpillage Tray Egg tray Using the crisper humidity control slidersBlue light Fresh Freeze CompartmentReplacing the Interior Light Bulb Recommendations for preservation of frozen foodDefrosting Page Maintenance and cleaning Protection of plastic surfacesChill compartment Icebox and Water Dispenser Minibar Recommended solutions for the problems Page Vibrations or noise Page 48 8425 0002/AD

Related manuals

Manual 601 pages 47.78 Kb