Blomberg IWD 1004 ET, KWD 9440 XA++, KWD 9440 X A+ Recommended solutions for the problems

Page 34

7 Recommended solutions for the problems

Please review this list before calling the service. It might save you time and money. This list includes frequent complaints that are not arising from defective workmanship or material usage. Some of the features described here may not exist in your product.

The refrigerator does not operate

• Is the refrigerator properly plugged in? Insert the plug to the wall socket.

• Is the fuse of the socket which your refrigerator is connected to or the main fuse

blown out? Check the fuse.

Condensation on the side wall of the fridge compartment. (MULTI ZONE, COOL CONTROL ve FLEXI ZONE)

• Very cold ambient conditions. Frequent opening and closing of the door. Highly

humid ambient conditions. Storage of food containing liquid in open containers. Leaving the door ajar.

• Switching the thermostat to a colder degree.

• Decreasing the time the door left open or using it less frequently.

• Covering the food stored in open containers with a suitable material.

• Wipe the condensation using a dry cloth and check if it persists. Compressor is not running

•Protective thermic of the compressor will blow out during sudden power failures or plug-out plug-ins as the refrigerant pressure in the cooling system of the refrigerator has not been balanced yet.

•Your refrigerator will start running approximately after 6 minutes. Please call the service if your refrigerator does not startup at the end of this period.

•The fridge is in defrost cycle. This is normal for a full-automatically defrosting refrigerator. Defrosting cycle occurs periodically.

•Your refrigerator is not plugged into the socket. Make sure that he plug is inserted tightly to the wall socket.

•Are the temperature adjustments correctly made? There is a power failure. Call your electricity supplier.

33

EN

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Page Contents Using your refrigerator Your RefrigeratorYour Refrigerator Optional Intended use Important Safety WarningsGeneral safety Do not put bottled and canned liquidPage Refrigerator door Child safetyHCA Warning Never dispose the product in fireThings to be done for energy saving Before operating your refrigerator InstallationAlways remember Disposing of the packaging Placing and InstallationElectric connection Disposing of your old refrigeratorIf your refrigerator is unbalanced Floor balance adjustmentDoor height adjustment Remove the lower ventilation cover byAdjusting the gap between Upper door Because of being wires in the hingeSituation should be made to take care Some models Installing Water FilterInstallation Requirements Water connection to the refrigeratorConnection of the Water Pipe to the Refrigerator Mode is active before taking out the by- pass cover Compartment by pulling it forward. FigureConnection of Water Hose to the Jug Water filter or installing the by-pass coverConnection of the Water Pipe to the Cold Water Mains Line Prior to first use of Ice/Water Dispenser Separate the union from the tap adaptor. Figure aAlways use the water filter when a jug is not being used Preparation Using your refrigerator Water Dispenser light button Water Dispenser LightsFresh Freeze Function Setting the fridge compartment temperatureSetting the freezer compartment temperature Quick Cool FunctionKey Lock Button Vacation ButtonIonizer Water Dispenser IlluminationUsing the Ice Dispenser Ice OffSpillage Tray Using the water springSliding Body Shelves Egg tray Using the crisper humidity control slidersBlue light Fresh Freeze CompartmentDefrosting Recommendations for preservation of frozen foodReplacing the Interior Light Bulb Page Maintenance and cleaning Protection of plastic surfaces Chill compartment Icebox and Water Dispenser Minibar Recommended solutions for the problems Page Vibrations or noise Page 48 8425 0002/AD
Related manuals
Manual 601 pages 47.78 Kb
Top Page Image Contents