Cleaning Discharge Air Vents
Check for a buildup of cooking vapors along discharge louvers in back of oven monthly. Clean air vent with damp cloth to ensure proper airflow. Dry thoroughly.
Discharge air vent
Cleaning Discharge Air Vents
Changing Oven Light Bulb
!CAUTION
To avoid electrical shock hazard unplug power cord or open circuit breaker to microwave oven before replacing light bulb. After replacing light bulb, reconnect power.
To avoid burns and cuts, wear gloves to protect hands should bulb break. If hot, allow bulb to cool.
Tools and Bulb
•Protective gloves
•Phillips screwdriver
•Light bulb rated 250 volt, 40 watt
1.Unplug oven.
2.Remove screw from back of oven and remove access cover.
•See illustration below.
3.Remove bulb by turning counterclockwise, being careful not to burn fingers or break bulb.
•Replace with bulb rated 250 volt, 40 watt.
4.Plug in oven.
Remove Light Bulb Cover
Cleaning Splatter Shield
!CAUTION
To avoid oven cavity damage, do not operate oven without splatter shield in place. Arcing will damage oven cavity and antenna when operated without shield in place.
Splatter shield keeps top of microwave oven cavity and antenna from becoming soiled. Clean soil from shield with damp cloth or clean with mild detergent and water. Remove splatter shield for easy cleaning.
1.Unplug oven before removing splatter shield to stop antenna from rotating.
2.Place fingers on front of shield, push forward, and down.
•When removing and replacing splatter shield, be careful not to bend antenna.
Removing Splatter Shield
3.Wash shield in hot, soapy water. Rinse and dry thoroughly.
•Do not wash splatter shield in dishwasher.
•Do not use abrasive cleaners.
4.Reinstall splatter shield by fitting tabs into slots at top of oven cavity back. Lift and press front of shield until shield snaps into place.
16