English
Installation
FM wire antenna |
|
| AM loop antenna | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speaker | Speaker |
(right) | (left) |
AC power cord
Rear connections
Warning:
Never make or change connections with the mains supply switched on.
ASpeakers connection
Use the supplied speakers only. Using other speakers can damage the set or the sound quality will be negatively affected.
●Connect the cables of the left speaker to L (red and black) and the cables of the right speaker to R (red and black) as follows:
Open the clip of the black terminal and fully insert the stripped portion of the black (or unmarked) speaker cable into the socket, then close the clip.
BAntennas Connection
AM (MW) antenna
1Unfold the loop antenna and if necessary, use screws (not supplied)to fix it to a flat, hard and stable place:
1
2
Open the clip of the red terminal and fully insert the stripped portion of the coloured (or marked) speaker cable into the socket, then close the clip.
2Fit the plug of the loop antenna to AM ANTENNA as shown below.
3Adjust the antenna for optimal reception
(as far as possible from a TV,VCR or radiation sources)
10