AUX playback/ Sleep
AUX playback
You can listen to the sound of the connected external device through your system’s speakers.
1Check the external device has been properly connected. (See Installation, Connecting an additional appliance)
2Press POWER to on, then press AUX to select AUX mode.
➜ Display shows : 
3To avoid noise distortion, turn down the volume on your external device.
4Press the PLAY key on the connected device to start playback.
5To adjust the sound and volume, use the sound controls on your external equipment and the MAS 55.
Sleep
You can set a certain period of time after which the set will switch to standby.
1Press POWER to on.
2Press SLEEP repeatedly to select the desired time period options (in minutes):
➜Display shows in sequence: SLP 10, 20, 30, 40, 50, 60, 70, 80, 90, 00.
➜Display shows the selected option briefly and returns to its previous status.
3To view the time countdown to the standby mode, press SLEEP again.
To deactivate the sleep timer, press SLEEP until SLP 00 is display or press POWER to switch the system to standby.
English
Reset
Reset
If desired, you can restore your system to its default setting.
1 Remove the power plug from the wall socket.
2Use a ballpoint pen to press the RESET for more than 30 seconds.
3Reconnect the power plug .
➜AM 
flashes.
➜The system is restored to its default setting.
19