Installation
FM antenna
1Extend the wire antenna and move the antenna in different positions for optimal reception (as far away as possible from the TV,VCR or other radiation sources).
2Fix the antenna’s end to the wall.
CConnecting an additional appliance
It is possible to use an additional appliance, e.g. TV,VCR, Laser Disc player, DVD player or CD recorder, with the system.
1Insert the red plug of the red/white audio cables (not supplied) to the red socket AUX IN R and the white plug to the white socket AUX IN L.
2Connect the other end of the audio cables to the AUDIO OUT terminals of the additional appliance.
Helpful hints:
–If the connected device has only a single audio out terminal, connect it to the AUX IN left terminal. Alternatively, you can use a “single to double” cinch cable, but the output sound still remain mono.
–Always refer to the owner’s manual of other equipment for complete connection.
Using AC power (illustration on Page 10)
1If your system is equipped with
a VOLTAGE SELECTOR, set this selector to your local power voltage if necessary.
2Make sure all connections have been made before switching on the power supply.
3Connect the power cable supplied to
AC MAINS ~ and to the wall socket.This switches on the power supply.
When the system is switched to standby, it is still consuming some power. To disconnect the system from the power supply completely, remove the power plug from the wall socket.
The type plate is located on the rear of the set.
English
11