Care and Maintenance

CLEANING YOUR BEVERAGE COOLER

∙Turn off the power, unplug the appliance, and remove all items including shelves.

∙Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.

∙Wash the shelves with a mild detergent solution.

∙Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.

∙Wash the outside cabinet with warm water and mild liquid detergent or furniture polish.

∙Rinse well and wipe dry with a clean soft cloth.

∙Do not use steel wool or steel brush on the wooden outside cabinet. These will destroy the surface.

POWER FAILURE

∙Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.

VACATION TIME

∙Short vacations: Leave the Beverage Cooler operating during vacations of less than three weeks.

∙Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary.

MOVING YOUR BEVERAGE COOLER

∙ Remove all items.

∙ Securely tape down all loose items (shelves) inside your appliance. ∙ Turn the adjustable legs up to the base to avoid damage.

∙ Tape the door shut.

∙ Be sure the appliance stays secure in the upright position during transportation. Also protect outside of appliance with a blanket, or similar item.

ENERGY SAVING TIPS

∙The Beverage Cooler should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight.