 ON/OFF Power,  Setting the Temperature Control

OPERATING YOUR BEVERAGE COOLER

It is recommended you install the Beverage Cooler in a place where the ambient temperature is between 72-78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate.

TEMPERATURE CONTROL PANEL

ON/OFF POWER

To turn ON or OFF the appliance, press the ON/OFF button .

The LED readout will show the original temperature set previously (the preset temperature at the factory is 43ºF(6ºC).

You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC

button. Fahrenheit or Celsius degrees indicators will appear in blue color in the temperature display window.

SETTING THE TEMPERATURE CONTROL

You can press UP or DOWN buttons to get the desired temperature.

. The degrees indicators will appear in the display window.

∙ Then press the UP or DOWN buttons to get the desired temperature. The LED indicator on the display will flash

∙ The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button

once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN button once.

∙The temperature range is 39 ~ 45ºF.

NOTE:

∙If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the Beverage Cooler will not start.

∙When you use the Beverage Cooler for the first time or restart the Beverage Cooler after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the Beverage Cooler is running for a few hours everything will be back to normal.