Avanti BCA5448 instruction manual Installation Instructions,  Before Using Your Beverage Cooler

Page 7

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

Read all instructions before using the Beverage Cooler.

DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

Before you throw away your old Beverage Cooler: Take off the door. Leave the shelves in place so that children may not easily climb inside.

Never allow children to operate, play with, or crawl inside the appliance.

Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR BEVERAGE COOLER

Remove the exterior and interior packing.

Check to be sure you have all of the following parts:

2 Beverage Shelves

1 Beverage Shelf with Temperature Control Panel

1 Instruction Manual

Before connecting the Beverage Cooler to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

INSTALLATION OF YOUR BEVERAGE COOLER

This appliance is designed to be for free standing installation.

Place your Beverage Cooler on a floor that is strong enough to support it when it is fully loaded. To level your Beverage Cooler, adjust the front leveling legs at the bottom of the Beverage Cooler.

Locate the Beverage Cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the protective coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

Avoid locating the unit in moist areas.

Do not let anything cover or obstruct the ventilation grilles.

Plug the Beverage Cooler into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

7

Image 7
Contents Manual DE Instrucciones BCA5448 Beverage CoolerTable of Contents Your safety and the safety of others are very important Appliance Safety Important Safeguides Help US Help YOU If YOU Need ServiceParts & Features  Before Using Your Beverage Cooler Installation Instructions Installation of Your Beverage Cooler  Extension Cord  Electrical Connection Surge Protector  Setting the Temperature Control  ON/OFF Power Shelves  Installing Stainless Steel Handle Storage  Interior LightCare and Maintenance Problem Possible Cause Troubleshooting GuideWiring Diagram Service for Your Beverage CoolerYour Avanti Products Warranty Instrucciones DE Seguridad Atencion Descongelacion LUZ InteriorAdvertencia SI UD. SE Muda Cuidado Y Mantenimiento LimpiezaPeriodo DE Vacaciones Corte DE CorrienteFigura / Imagen para referencia solamente  Sistema DE Filtracion DE CarbonRegistration Information BCA5448 VER4.0