Operating Your Beverage Cooler

It is recommended you install the appliance in a place where the ambient temperature is between 72- 78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 34 - 43 degrees Fahrenheit may not be reached.

You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display window.

 ON/OFF POWER	button/mark and hold for 3 seconds.
To turn ON or OFF the appliance, press the

SETTING THE TEMPERATURE CONTROL

You can press UP

and DOWN

buttons/marks to control the internal temperature .

The degrees indicators will appear in the display window.

∙The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the

DOWN button/mark once.

NOTE:

∙If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the Beverage Cooler will not start.

∙When you use the Beverage Cooler for the first time or restart the Beverage Cooler after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the Beverage Cooler is running for a few hours everything will be back to normal.

CONTROL PANEL – AUTOMATIC LOCK FUNCTION

Your unit is equipped with an automatic locking control panel to protect again accidental temperature changes.

The control panel will automatically lock within 12 seconds if no buttons are pressed after setting the desired temperature.

For the security of control panel, this unit has lock/Unlock function.

To unlock, press + simultaneously for approximately 3 seconds.

INTERIOR LIGHT

The interior light is controlled automatically by opening and closing the door.

When the door is opened the light will turn ON and will remain ON until the door is closed. When the door is closed the light will be OFF and will remain OFF until the door is opened.