Avanti BCAD338 manual  ON/OFF Power,  Setting the Temperature Control

Page 10

OPERATING YOUR BEVERAGE COOLER

IMPORTANT SAFEGUARDS

Do not store food in Beverage Center, as interior temperature may not get cool enough to prevent spoilage.

As a natural result of condensation, in summer months or areas of high humidity, the glass door may build up moisture on the outside. Just wipe it away.

It is recommended you install the appliance in a place where the ambient temperature is between 72- 78 ºF (22º - 26ºC).

If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 34º-43ºF (1º-6ºC) may not be reached.

Your Beverage Cooler is designed to operate with at a range of 34º - 43º F (1 – 6ºC).

You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display window.

ON/OFF POWER

To turn ON or OFF the appliance, press the

button/mark .

SETTING THE TEMPERATURE CONTROL

You can press UP

and DOWN

buttons/marks to control the internal temperature .

The degrees indicators will appear in the display window.

The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the

DOWN button/mark once.

NOTE:

If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the Beverage Cooler will not start.

When you use the Beverage Cooler for the first time or restart the Beverage Cooler after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the Beverage Cooler is running for a few hours everything will be back to normal.

Also, as cold air falls and warm air rises, there could be a slight temperature variance between the top and bottom shelves.

10

Image 10
Contents Model Number / No. de Modelo Manual DE InstruccionesBCAD338 Table of Contents Appliance Safety Your safety and the safety of others are very importantImportant Safeguides Help US Help YOU If YOU Need ServiceAvanti Customer Service Read this guide carefullyParts & Features  Extension Cord  Surge Protector Before Using Your Beverage Cooler Installation Instructions Installation of Your Beverage Cooler  Caster Wheel Installation Step ON/OFF Power  Setting the Temperature Control Door Lock  Storage Interior Light  Positive Seal SELF-CLOSING DoorCare and Maintenance Troubleshooting Guide Problem Possible CauseWiring Diagram Avanti Products Customer ServicesLimited Second Through Fifth Year Warranty What is Covered Limited ONE-YEAR WarrantyWhat is not Covered Instrucciones DE Seguridad Atencion Luz interior OperaciónCerradura de la puerta Cuidado Y Mantenimiento  RepisasPage Page Is This Product Used  Promote better productsHow Did You Learn About This Product