Care and Maintenance

REPLACING THE FLUORESCENT INTERIOR LIGHT

NOTE:

All parts removed must be saved to do the replacement of the fluorescent light.

Before removing the fluorescent light, either turn off the appliance or disconnect the electricity leading into the appliance at the main power supply. Failure to do so could result in electrical shock or personal injury.

•Turn off the fluorescent light.

•Pull down to remove the fluorescent light cover (3) softly.

•Rotate the fluorescent light (2) 90° and pull down to remove it from the light holder (1) softly.

•Replace with a T-4 fluorescent light that is the same shape and size.

•Replace the light cover (3).

1.Light Holder

2.Fluorescent Light T4(8W)

3.Light Cover

CLEANING YOUR BEVERAGE COOLER

•Turn off the power, unplug the appliance, and remove all items including shelves.

•Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.

•Wash the shelves with a mild detergent solution.

•Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.

•Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.

•Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless steel with steel particles and rusting may occur.

POWER FAILURE

•Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.

MOVING YOUR BEVERAGE COOLER

•Remove all items.

•Securely tape down all loose items (shelves) inside your appliance.

•Tape the door shut.

•Be sure the appliance stays secure in the upright position during transportation. Also protect outside of appliance with a blanket, or similar item.

ENERGY SAVING TIPS

•The Beverage Cooler should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight.