Bryant 3163 Lighting and Start-Up Instructions, AC Operation, DC Operation, Shut-Down All Modes

Page 7

Lighting and Start-Up Instructions

A

B

C

E

G

 

 

 

 

D

F

Figure 8

The Lighting and Start-Up Instructions are located on the top portion of the interior door liner.

Refer to Figure 8 for location of the operating controls. Notice: When warm humid weather conditions are ob- served, operate the refrigerator on either AC or DC electric for a minimum of five (5) minutes before attempting to follow the Start-Up Instruc-

tions for Gas operation.

AC Operation

1.Press mode selection button (C).

2.Set the thermostat (B) to the coldest (maximum) setting. Allow to operate at maximum setting for 6 to 8 hours before setting to mid range.

DC Operation

1.Press mode selection button (D). There is no need to set thermostat to any setting. The DC operation is a continuous run (no thermostat control) mode.

3.Push and hold the safety valve button (A) until the indicator lamp (G) glows steady. Continue to hold the safety valve button in for 15 seconds and then release. The indicator lamp should remain a steady glow. If the lamp turns off, repeat this step.

Notice: On initial start-up, it may take longer for the burner to light because of air being purged from the gas supply line.

WARNING

Do not hold gas valve in more than 30 seconds. If the flame is not indicated within this time, press selector switch (F), wait 2 minutes, and retry. Continuing to hold the gas valve in will cause gas to build up in the burner area and can result in an explosion which can cause property damage or severe personal injury.

1. Set thermostat to desired temperature setting.

Gas Operation

1.Set thermostat (B) to the start setting.

2.Press mode selector button (E). Ignition spark will be present at the burner.

Shut-Down: All Modes

Press mode selector button (F). This will interrupt all AC and DC power and stop operation of the refrigerator.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model ContentsDouble-Wrenching Gas Fittings Important Safety InformationGeneral Information SpecificationsDirect Vent Requirements Air Intake/Exhaust Assembly Insulating the Flexible Exhaust Piping Installing Refrigerator into the EnclosureTesting of the Vehicle’s Gas Supply Piping Propane SystemDescription of Controls Shut-Down All Modes Lighting and Start-Up InstructionsAC Operation DC OperationEuroVan Norcold Limited Warranty Time Allowance ChartHeater Wires RialtaWiring Pictorial & Diagram Important Safety Information AC Circuit Refrigerator Will Not Operate on AC SpecificationsImportant Safety Information DC Circuit Refrigerator Will Not Operate on DC Electric Important Safety Information Gas Circuit No Spark at Burner Page Burner Ignites But Flame Will Not Hold Important Safety Information DC Fan Circuit Trouble Shooting Ventilation Fan Diagnostic Procedures Diagnosing Cooling ProblemsEuroVan Camper Refrigerator Removal ProceduresRialta Vent Kit Assembly Description Final Assembly Final Assembly Description Control Cover Assembly Description Description Control AssemblyBurner Box Assembly Description #$%

3163 specifications

Bryant 3163 is an advanced heating, ventilation, and air conditioning (HVAC) system that embodies the latest in HVAC technology and efficiency. Designed to meet the needs of modern homeowners, the Bryant 3163 offers a perfect blend of comfort, reliability, and energy savings.

One of the standout features of Bryant 3163 is its state-of-the-art variable-speed compressor. This technology allows the unit to adjust its output based on the specific demands of the environment, providing optimal comfort while minimizing energy consumption. Instead of running at a single, fixed speed like traditional systems, the variable-speed compressor can operate at different levels, ensuring a consistent and comfortable temperature throughout the home.

In addition to its impressive compressor, the Bryant 3163 is equipped with innovative multi-zone capabilities. This system allows homeowners to create separate climate zones within their homes, ensuring individualized comfort for different rooms or areas. This is particularly beneficial for larger homes where temperature preferences can vary widely between family members or activities in different areas.

The system also boasts an advanced air filtration system, which helps improve indoor air quality by capturing allergens, dust, and other airborne particles. The high-efficiency filters not only promote better health but also contribute to the overall efficiency of the HVAC system. Cleaner air means less strain on the system, leading to lower energy bills and an extended lifespan of the unit.

The Bryant 3163 incorporates smart technology, allowing homeowners to control their HVAC system remotely through smartphones or tablets. This feature enhances convenience, enabling users to adjust settings, monitor energy usage, and schedule maintenance with ease.

With a strong focus on energy efficiency, the Bryant 3163 meets stringent energy performance standards, qualifying for various efficiency rebates and incentives. Its quiet operation is another highlight, making it an ideal choice for residential environments where noise reduction is a priority.

In summary, the Bryant 3163 is a cutting-edge HVAC solution that excels in efficiency, comfort, and technology. With its variable-speed compressor, multi-zone capabilities, advanced air filtration, smart technology integration, and emphasis on energy savings, Bryant 3163 stands out as an excellent choice for homeowners seeking dependable climate control that prioritizes both comfort and efficiency.
Top Page Image Contents