Installation
3.9.Connecting of the water hose to the cold water mains line
ASP341 models only
(This feature is optional)
If you will use the refrigerator by connecting it to the cold water mains line, you must install a standard 1/2" valve connector to the cold water installation of your home. If this valve is not present or you are not sure, consult a qualified plumber.
1.Separate the union from the tap adaptor.
2.Install the tap adaptor to standard 1/2” valve connector.
3.After inserting the water hose to the union, install it to the tap adaptor and insert to the union to the tap adapter.
4.Tighten the union by hand.
A
A WARNING: After turning on the water valve, make sure that there is no leakage at both connection points of the water hose. If there is a leakage, turn off the valve immediately and tighten all joints again using a spanner or a pliers.
A WARNING: Make sure that standard 1/2" valve connector is available and completely turned off on your cold water mains line.
3.10.Water filter
(This feature is optional)
Your refrigerator may be equipped with an external or internal filter depending on its model. To fit the water filter, follow the instructions below referring to the figures supplied:
10 / 30 EN
Refrigerator / User Manual