Perlick SDBR48 Adjustments, Sliding Doors, Shelving Adjustment, LED Light Replacement

Page 6

 

 

 

 

 

Models SDB/SDP Installation & Operation Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjustments

 

 

 

Never attempt to repair or

5. Plug new LED into harness and secure to

 

DANGER

 

 

perform maintenance on

housing using screws removed in step 2.

 

 

the unit until the main electrical power to the

6. Snap LED cover into place.

unit has been disconnected!

Sliding Doors

Shelving Adjustment

Removing / Installing

 

 

 

Completely empty shelf or

 

CAUTION

1. To remove the sliding door, simply grasp the

 

 

 

drawer before removing.

door on each side and lift up off the bottom

1. Open the door. Tilt the shelf and remove it

track, then tilt outwards and pull down to

 

from the unit

 

remove from upper track.

2. Reposition each bracket separately. Grasp the

2. To reinstall sliding door, place door in upper

 

middle of the bracket, pull the front end up and

 

track, making sure to engage the bracket

 

out, then forward to remove it. See Figure 3.

 

(Figure 5), lift door up into the track and place

3. Place brackets at desired location and reinstall

into the bottom track.

 

shelf(s).

Adjusting Door Spring Tension

 

 

 

 

 

A tension spring is located in the upper track of

 

 

 

 

 

each door. To increase or decrease spring tension,

 

 

 

 

 

remove the Phillips screw and position the bracket

 

 

 

 

 

in one of three detentes and reinstall screw. The

 

 

 

 

 

detente farthest to the left provides the least

 

 

 

 

 

amount of tension.

Figure 3. Shelf Bracket

LED Light Replacement

Unplug LED Light Strip

LED Light Strip

NOTE: Units are shipped from the factory with springs set at the weakest setting.

Make sure door engages bracket

Lens Cover

#6-32 x 3/8”

machine screw (Qty. 2)

Figure 4. Interior LED Light

1.Open the door.

2.Using a flat blade screwdriver, carefully pry off the lens cover.

3.Remove the two screws securing LED light to housing.

4.Unplug the LED from the wiring harness.

Figure 5. Removing/Installing Sliding Door

Sliding Door Lock

Each set of sliding doors is equipped with a keyed lock located on the bottom of the right side door. To lock the doors, place the lock lever in the DOWN position and lock with the key. Unlock with the key and place lever in the UP position to open.

Printed in USA

6

0213

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Commercial Back Bar Table of Contents SafetyGeneral Information Plumbing Prior To InstallationUncrating and Inspection ElectricalInstallation Sealing Cabinet to Floor Refrigeration and Temperature ControlDigital Temperature Control Checking Product Temperature OperationLED Light Replacement AdjustmentsShelving Adjustment Sliding DoorsCleaning Cabinet Interior/Exterior MaintenanceStainless Steel Care & Cleaning Cleaning the Door TracksCleaning the Condenser Recommended Cleaners for Specific SituationsMay damage the compressor and void the warranty Troubleshooting Before Calling For ServicePower to the unit has been disconnected For Product Service For Replacement Parts and AccessoriesFor Product Information Dimensions 0213 0213 0213 Wiring Diagrams 0213 0213 0213 Warranty Lost and Damaged MerchandiseONE Year Parts Warranty

SDBR48 specifications

The Perlick SDBR48 is a state-of-the-art commercial refrigerator designed for those in the food and beverage industry who require reliable, efficient, and high-capacity storage solutions. Known for its performance and durability, the SDBR48 is particularly favored by bars, restaurants, and catering businesses.

One of the standout features of the SDBR48 is its spacious interior, which includes a generous 48-inch width that can accommodate a variety of beverages, including kegs, wine bottles, and other perishable items. With a capacity of nearly 20 cubic feet, this unit offers ample storage space while maintaining an organized layout. The adjustable shelving allows for a customizable approach, making it easy to store items of varying sizes.

The SDBR48 is equipped with advanced refrigeration technology that ensures optimal temperature control. It uses a consistent and efficient cooling system, maintaining temperatures between 33°F and 38°F, which is ideal for preserving the quality of beverages. The unit's self-closing doors feature a magnetic gasket that aids in maintaining a uniform temperature by minimizing cold air loss.

Another notable characteristic of the Perlick SDBR48 is its energy efficiency. Operating with an Energy Star rating, it not only saves on utility costs but also reflects a commitment to environmentally friendly practices. The insulation is designed to be thicker than many competitors, further improving energy conservation.

The stainless steel construction is both stylish and practical. It is resistant to scratches and dents, making it particularly suited for busy environments. Moreover, its sleek appearance allows it to seamlessly fit into any bar or kitchen décor.

In terms of convenience, the SDBR48 comes with an easy-to-use digital temperature control system, providing users the means to monitor and adjust settings effortlessly. Also, the unit is equipped with LED interior lighting, illuminating the contents without generating heat.

With its combination of robust features, advanced technologies, and a focus on efficiency, the Perlick SDBR48 is an excellent investment for businesses looking to enhance their beverage storage capabilities while maintaining the highest standards of quality and performance. Whether it's for a small café or a large-scale restaurant, the SDBR48 delivers reliability and functionality that professionals can depend on.
Top Page Image Contents