Perlick DC Series specifications Installation and Operating Instructions

Installation and Operating Instructions

Sizes and Specifications, Concessionaire Dispensers

MODEL NOS.			DC2KP			DC3KP		DC4KP
KEG CAPACITY				2 Keg		3 Keg		4 Keg
DIMENSIONS	Length Ins. (mm)		72” (1829)			84” (2134)	96” (2438)
CABINET	Depth Ins. (mm)		241/8” (613)			241/8” (613)	241/8” (613)
	Height Ins. (mm)		341/2” (876)			341/2” (876)	341/2” (876)
NO. OF DISPENSING HEADS		1				1	2
NO. FAUCETS		2				2	2
CONDENSER UNIT H.P.		1/4				1/3	1/3
RUNNING LOAD - AMPS		5.9				7.5	7.5
SHIP WT lbs. (kg)		445 (202)				505 (229)	545 (247)
INTERIOR		Fourteen gauge stainless steel sills are reinforced with a 12 gauge angle bracket that extends from one
		end of the insulated base to the other. The floor pan is 20 gauge, type 304 stainless steel. The walls and
		ceiling are 20 gauge galvanized steel.
EXTERIOR		The top is 20 gauge stainless steel. Bottom is 20 gauge stainless steel. Doors, front, back and sides are
		20 gauge black powder coated steel.
STORAGE COMPARTMENTS		Side compartment houses a four gallon stainless steel drainer overflow tank, two drain valves with garden
		hose fittings for cabinet floor drain and overflow tank, and 20 lb. CO2 drum holder. Front compartment
		provides storage for cups or other non-refrigerated items.
REFRIGERATION		R-134a capillary tube-type. Aluminum fin and copper tube evaporator coil. Forced air into dispensing head.
		Adjustable temperature control. Self-defrosting. Pull-out condensing unit for service and cleaning.
VENTILATION		Front ventilated.
ELECTRICAL		115 Volt, 60 Hz., 1 Phase AC. Furnished with three prong, six foot rubber cord.
		Contact Perlick for other voltage/frequency requirements.
PLUMBING		None required. Condensate evaporates automatically.
INSULATION		Foamed-in-place polyurethane; 2” walls, 11/2” top and floor.
OPTIONAL ACCESSORIES		• Optional Dispensing Heads			• Shelf Kit	• Faucet Locks
		• Keg Couplers			• Regulators

	Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2060A	2
Rev. 12.05.03