Perlick DC Series specifications Step

Page 8

Pouring a Perfect Glass of Beer – Concessionaire Dispensers

STEP 1

 

 

 

Start with a clean glass.

 

Place the glass at a

 

45° angle, one inch

 

below faucet. Do not

 

let the glass touch the

 

faucet. Open the faucet

 

all the way.

 

 

STEP 2

 

After the glass has

 

reached half full,

 

gradually bring the

 

glass to the upright

 

position

STEP 3

Let the remaining beer run straight down the middle of the glass. This ensures proper release of CO2 by producing a 34” to 1” foam head.

STEP 4

Close the faucet quickly and completely.

 

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.

Form No. Z2060A

8

Rev. 12.05.03

Image 8
Contents Model NOS Installation and Operating Instructions Sizes and Specifications, Concessionaire DispensersPreparing the Cabinet for Use Concessionaire Dispensers Installation and Tapping Concessionaire Dispensers Connecting the Keg CouplerImportant Be sure to close this valve when untapping keg Tapping a Single Valve Keg SankeyConnecting the Regulator to the CO2 Cylinder Adjusting the CO2 Gas FlowProper CO2 Handling CO2 Leak TestTemperature Refrigeration and Temperature ControlAdjusting the temperature Draft Beer Information Concessionaire DispensersCleaning the Condenser Cleaning the Beer System Concessionaire DispensersCleaning the Cabinet Step Trouble Shooting Concessionaire Dispensers Beer Service Problems Wild BeerFlat Beer Cloudy BeerCondensing units 2 door models Replacement Parts Concessionaire DispensersAll Models Part Description For Single Valve Keg Coupler Series DMiscellaneous Wiring Diagram Concessionaire Dispensers