The electronic timer
ΦLook on p. 13 to learn how to use the core temperature function.
The electronic timer is a
Display:
Lights (for each selector button/function)
Time, alarm time (actual value in each case) Core temperature (value set)
lower light will be illuminated when the time is set for a.m
upper light will be illuminated when the time is set for p.m
Lights will be illuminated when the oven is switched on.
Core temperature (actual value)
Selector buttons:
7Cooking time
8Finish time (with roasting thermometer: start time)
4 Alarm time
3 Core temperature function
Adjust:
+/- for altering the values of all functions.
Setting/changing the clock
– Push simultaneously “7 ” and “8 ”, until the time in the display flashes.
– Adjust as needed using “+”/“-”.
– Wait for the display to stop flashing. The time will then be accepted, and the dot between the hour and the minutes will flash every second.
Setting the alarm time
You can use the alarm on its own, without effecting the oven.
– Press “4 ”. The lamp will flash. The display will read “0.00”.
– Use “+”/“-” to set the timer in minutes and seconds.
– Start the timer with “4 ” or wait until the light stops flashing. You will see the time remaining in the display until the buzzer sounds.
You’ll hear an acoustic signal when the alarm time has elapsed.
– Press any button to stop the buzzer. The normal clock will appear on the display.
How to program the switching operations
1. Select the operation:
–Press the selector button for the desired operation. The light above the button you pressed will start flashing and a number will appear in the display.
2. Altering/adjusting the operation:
– Adjust the value shown, using “+” and
3. Start the operation:
If you don’t press another button for 3 seconds, the operation will start automatically and the light will stay on.
ΦYou can reduce the time by pressing a selector button:
-the previously selected button confirms the input and starts the operation.
-another button confirms the input and selects the new operation you’ve choosen.
4.Setting the oven functions (switching functions only):
–Use the mode selector to select the mode and the temperature control to select the temperature.
You can set the temperature and mode before programming the timer.
Changing the setting
If you want to change a setting you’ve made – even if the operation is running
–push the appropriate button again and use
When the cooking time is finished
The oven will switch off and “End” will appear in the display. A warning signal will sound. Both of the lights next to the display will stop flashing.
–Press any selector button to stop the alarm buzzer.
The display will show the normal clock again. The oven starts again. except when the roasting thermometer is inserted).
–Turn the temperature control and the mode selector switch to “0”.
EEB 9600.0 USA | 11 |