Onkyo HTX-22HDXST Playing Your Components-Continued, Setting the Display Brightness

Playing Your Components—Continued

SLEEP DIMMER

MUTING

Setting the Display Brightness

You can adjust the brightness of the display.

Press the remote controller’s [DIMMER] but- ton repeatedly to select dim, dimmer, or normal brightness.

Muting the HTX-22HDX

You can temporarily mute the output of the HTX-22HDX.

Press the remote controller’s [MUTING] but- ton.

The output is muted and the MUTING indi- cator flashes on the display.

To unmute the HTX-22HDX, press the remote controller’s [MUTING] button again, or adjust the volume. The output is unmuted and the MUTING indicator goes off. Muting is cancelled when the HTX-22HDX is set to Standby.

Using the Sleep Timer

With the sleep timer, you can set the HTX-22HDX so that it turns off automati- cally after a specified period.

Press the remote controller’s [SLEEP] but- ton repeatedly to select the required sleep time.

The sleep time can be set from 90 to 10 min- utes in 10 minute steps.

When the sleep timer has been set, the SLEEP indicator appears on the display, as shown. The selected sleep time appears on the display for about 5 seconds, then the pre- vious display appears.

SLEEP indicator

To cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears.

To check the remaining sleep time, press the [SLEEP] button. Note that if you press the [SLEEP] button while the sleep time is being displayed, you’ll shorten the sleep time by 10 minutes.

29