Onkyo HTX-22HDX Connecting Onkyo Components, Connecting AV Components-Continued, Direct Change

Connecting AV Components—Continued

Connecting Onkyo Components

Connecting an Onkyo RI-capable component or Onkyo Dock with iPod to the HTX-22HDX with an cable and RCA audio cable will allow you to use the following system control func- tions. An cable is a special cable for use with Onkyo’s (Remote Interactive) control system.

Auto Power On/Standby

If you turn on or start playback on the Onkyo RI-capable component or Onkyo Dock with iPod, the HTX-22HDX will automatically turn on and select the RI-capable component or iPod as the input source. Similarly, when the HTX-22HDX is set to Standby, the Onkyo RI-capable compo- nent or Onkyo Dock with iPod will also go on Standby.

Direct Change

When playback is started on the Onkyo RI-capable component or Onkyo Dock with iPod, the HTX-22HDX automatically selects the RI-capable component or iPod as the input source.

Remote Controller Operation

In addition to controlling the HTX-22HDX, you can also use the HTX-22HDX’s remote control- ler to control an Onkyo RI-capable component or Onkyo Dock with iPod. When doing so, remember to point the remote controller at the HTX-22HDX and not at the RI-capable compo- nent or Onkyo Dock. Hookup information is shown below. The remote controller buttons that you can use to control an Onkyo RI-capable component or Onkyo Dock with iPod are explained on pages 25 and 26.

■Hookup

The following diagram shows how to connect an Onkyo RI-capable component and RI Dock with iPod to the HTX-22HDX for operation. Use the cables supplied with the RI-capable component and RI Dock. An cable is not supplied with the HTX-22HDX.

cable

cable
Onkyo RI-capable
component	RI Dock

L/R audio	L/R audio
out	out

RCA audio cable

RCA audio cable

23