Onkyo HTX-22HDXST Specifying the Digital Signal Format, Auto Power Down, Setup-Continued

Setup—Continued

Notes:

•Select Off if your TV is incompatible or you’re not sure about its compatibility.

•The TV Control setting can be set only when the above Control and Power Control settings are both set to On.

Note:

•After changing the Control, Power Con- trol, or TV Control setting, be sure to turn all of your components off and then back on again. Refer to the instruction manuals for your other components.

Auto Power Down

With Auto Power Down, you can set the HTX-22HDX so that it automatically switches to Standby if there’s no input signal or operation for about 2 hours.

Off:

Auto Power Down off.

On:

Auto Power Down on.

On North American models, the default set- ting is Off. On other models, it’s On.

Note:

•When Auto Power Down is set to On, even if an input signal is present, if the level of that input signal is very low, the HTX-22HDX may switch to Standby after about 2 hours.

Specifying the Digital Signal Format

SETUP

ENTER

RETURN

Normally, the HTX-22HDX detects the for- mat of digital input signals automatically. However, if you experience either of the fol- lowing issues when playing PCM or DTS sources, you can specify the signal format manually.

•If the beginnings of tracks from a PCM source are cut off, try the PCM setting.

•If noise is produced when fast forwarding or rewinding a DTS CD, try the DTS setting.

1 With a PCM or DTS input source selected, press and hold the [SETUP] button for 3 seconds until “Fixed Mode: Auto” appears on the display.

2 While “Fixed Mode: Auto” is displayed (about 3 seconds), press the Left or Right []/[] button repeatedly to select: PCM, DTS, or Auto.

PCM: Only 2-channel PCM format input signals will be heard. If the input signal is not PCM, the PCM indicator will flash and there will be no sound.

DTS: Only DTS format input signals (excluding DTS-HD) will be heard. If the input signal is not DTS, the DTS indicator will flash and there will be no sound.

Auto (default):

All digital input signals can be heard.

45