Onkyo HTX-22HDXST Turning On the HTX-22HDX, Connecting the Power Cord, Turning On and Standby

Turning On the HTX-22HDX

Connecting the Power Cord

	To
AC INLET	wall outlet
CAUTION :
SPEAKER IMPEDANCE
6 ~ 16Ω/SPEAKER
MPP
Supplied power cord

Before connecting the power cord, connect all of your speakers and other components.

1 Connect the supplied power cord to the HTX-22HDX’s AC INLET.

2 Plug the other end of the power cord into a suitable wall outlet.

The STANDBY indicator lights up.

Notes:

•Turning on the HTX-22HDX may cause a momentary power surge that might inter- fere with other electrical equipment on the same circuit. If this is a problem, plug the HTX-22HDX into a different branch cir- cuit.

•Do not use a power cord other than the one supplied with the HTX-22HDX. The sup- plied power cord is designed exclusively for use with the HTX-22HDX and should not be used with any other equipment.

•Never disconnect the power cord from the HTX-22HDX while the other end is still plugged into a wall outlet. Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet first, and then the HTX-22HDX.

Turning On and Standby

ON/STANDBY

STANDBY
indicator	STANDBY
	HDMI Thru
ON/STANDBY

On the HTX-22HDX, press the [ON/STANDBY] button.

On the remote controller, press the [ON/STANDBY] button.

The HTX-22HDX comes on, the display lights up, and the STANDBY indicator goes off.

To turn off the HTX-22HDX, press the [ON/STANDBY] button, or press the remote controller’s [ON/STANDBY] button. The HTX-22HDX will enter Standby mode. To prevent any loud surprises the next time you turn on the HTX-22HDX, turn down the vol- ume before you turn it off.

27