Sennheiser EK3253 manual Adjusting a setting, Storing a setting, Exiting the operating menu

Page 19

Adjusting a setting

Press the / rocker button to adjust the setting.

Bybrieflypressingthe / rockerbutton,the displayjumps either forwards or backwards to the next setting. In the “CHAN”, “TUNE”, “NAME” and “BAL/FOC” menu, the / rocker button features a “fast search” function. If you hold down a button, the display cycles continuously. The “fast search” function allows you to get fast and easily to your desired setting.

The new setting flashes on the display until it is stored.

Storing a setting

Press the SET button to store the setting. “STORED” appears on the display, indicating that the setting has been stored. The display then returns to the previous menu level. With most menus, new settings become effective immediately without having to be stored. An exception is the “RESET” menu. With this menu, new settings only become effective after they have been stored (“STORED” appears on the display, indicating that the setting has been stored).

Exiting the operating menu

Select the “EXIT” menu to exit the operating menu and to return to the standard display.

21

Image 19

Contents Instructions for use Contents Thank you for choosing Sennheiser Health risks arising from use Safety instructionsIntended use of the receiver Delivery includesImproper use Channel bank system EK 3253 bodypack receiverRecommended transmitters UP/DOWN Operating controlsIndications and displays Operation and battery status indicationLC display Mute display Modulation display of the received transmitterPilot display RF signal indicationDisplay backlighting Inserting and replacing the batteries Preparing the receiver for useInserting and charging the accupack Switching the receiver on/off Using the receiverConnecting the headphones Adjusting the volume Activating/deactivating the lock mode Adjusting the balance/FOCUSAttaching the receiver to clothing Buttons Operating menuOverview of menus Getting into the operating menu Working with the operating menuSelecting a menu Storing a setting Adjusting a settingExiting the operating menu Exit Operating menu of the receiverChan Selecting a channel Chan Adjustment tips for the operating menuReleasing locked channels Adjusting the squelch threshold SqelchScanning the channel bank for free channels Starting the scan and storing the scan resultImportant note HI-BST Stereo/FOCUS selection ST-FOCEntering a name Name Selecting the standard display DislpyActivating/deactivating the lock mode Lock Loading the factory-preset default settingsActivating/deactivating the pilot tone evaluation Pilot Exiting the operating menu Exit Error checklist If problems occurFor optimum reception Maintenance and careRecommendations and tips For the receiverAdditional information Pilot tone squelch SquelchField strength-dependent squelch EK 3253 bodypack receiver SpecificationsAccessories Connector assignmentWarranty regulations